Anetsberger Brothers MG, SG, SGC warranty Grill Troubleshooting Guide, Problem Cause Remedy

GRILL TROUBLESHOOTING GUIDE (Continued)

PROBLEM		CAUSE		REMEDY
Main burners do not	1.	Check that gas control valve is set to	1. Yes - Proceed to test #2.
ignite.		“ON”.		No - Turn to “ON” and skip to
				test #5.
	2.	Check that pilots are burning.	2. Yes - Proceed to test #3
				No - Follow lighting instructions
				on page 7. Skip to test #5.
	3.	Increase temperature setting on	3. Proceed to test #4.
		thermostat control.	4. Increase if needed, proceed to
	4. Check gas supply pressure with all other			test #5.
		equipment operating. (6” WC for natural	5. Yes - Okay.
		gas and 11” WC for propane, minimum)
				No - Replace gas control valve.
	5.	Observe if main burners ignite.
Over temperature or	1.	Turn thermostat control to “OFF”.	1. Yes - Skip to test #3.
main burners do not		Observe if main burners go off.		No - Proceed with test #2.
stop burning.	2. Turn gas control valve knob to “OFF”.		2. Yes - Proceed with test #3.
		Observe if main burners go off.		No - Replace gas control
	3. Reset thermostat control to desired			valve.
		setting. Observe if main burners go off	3. Yes - Okay.
		when temperature is reached.		No - Replace thermostat.
Grill plate is cold	1.	Check that gas supply is turned on.	1.	Yes – Proceed to test #2.
(Burners not				No – Turn on, follow
firing).				Lighting Instructions on
				page 7. Skip to test #4.
	2.	Check for lit pilot.	2.	Yes – Proceed to test #3
				No – Follow Lighting
				Instructions on page 7. Skip
				to test #6.
	3.	Check that gas control valve is in “ON”	3.	Yes – Proceed to test #4.
		position.		No – Turn to “ON”. Skip to
				test #6.
	4.	Check that thermostat control is at	4.	Yes – Proceed to test #5.
		desired setting.		No – Increase setting.
				Proceed to test #5.

11