Anetsberger Brothers MG, SG, SGC warranty Grill GAS Supply Specifications, Supply Pressure

Page 4

GRILL GAS SUPPLY SPECIFICATIONS

Please make sure that your desired grill location has gas

supply factors that are suitable for this product:

 

Natural Gas

Propane Gas

 

 

 

MANIFOLD PRESSURE*

3½“ W.C. **

10“ W.C.

SUPPLY PRESSURE***

6“ W.C., minimum

11“ W.C., minimum

 

 

 

*- Measured at tap on back side of gas manifold.

**- “ W.C. = Inches, Water Column.

***- Measure supply pressure ahead of pressure regulator when all other gas-powered equipment is operating.

Refer to the specification plate on the grill to identify the BTUH input for your specific model.

IMPORTANT NOTE: BTU/Hr Ratings are based on sea level operation. For sites above 2000 feet, reduce this rating 4% for each 1000 feet above sea level.

Gas Supply Inlet Pipe must be ¾” NPT (National Pipe Thread) standard gas line. The gas supply inlet line should be as straight as possible (fewest bends or elbows) to obtain the highest available gas pressure at the appliance.

NOTE: Using a flexible inlet line permits variation in the gas supply line location, both horizontally and vertically.

Anets grills are only for use with the type of gas specified on the spec plate. If a grill requires modification to use a gas other than that which is identified on the grill spec plate, contact your Anets representative or call (800) 837-2638.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents GoldenGRILL Contents Shipping Container Inspection Models Covered By This ManualGrill GAS Supply Specifications Supply PressureCode Requirements Installation Requirements GAS Connection InstructionsLighting Procedure Grill Operating InstructionsGrill Shut Down Procedure Grill Preparation for USEManual and Standard Grills only do not USE for Chrome Grill Chrome GrillDaily Cleaning Procedure Monthly Maintenance InstructionsGrill Troubleshooting Guide Problem Test RemedyGrill Troubleshooting Guide Problem Cause RemedyProblem Cause RemedyLimited Warranty Toll-free Customer & Warranty Service 800

MG, SG, SGC specifications

Anetsberger Brothers has long been recognized for its innovative approach in the field of precision manufacturing. Among their notable products are the MG, SG, and SGC series, each designed with unique features and capabilities that cater to different industrial needs.

The MG series, known for its robust construction and versatility, offers a range of models that excel in both precision and durability. With high-speed operation and an intuitive interface, the MG series is particularly suited for production lines where efficiency is paramount. These machines are equipped with state-of-the-art CNC technology, allowing for intricate designs and exact specifications. Additionally, the MG series features advanced cooling systems to maintain optimal performance during prolonged usage, ensuring consistent output quality.

Moving on to the SG series, these machines are tailored for high-volume production with an emphasis on speed without compromising quality. The SG series is equipped with an advanced servo drive system that enhances operational efficiency, permitting rapid changes in production setups. Anetsberger Brothers incorporates smart sensors in the SG models, enabling real-time monitoring and adjustments to various parameters, further improving accuracy and reducing waste. The SG series also emphasizes user-friendly controls, making it accessible even for operators with minimal training.

The SGC series takes innovation a step further with its smart technology integration. This series is designed for industries seeking not only productivity but also connectivity. The SGC machines come equipped with IoT capabilities, allowing for seamless integration into smart factories. Their ability to connect with cloud-based systems provides valuable data analytics that can drive decision-making. Moreover, the SGC models emphasize energy efficiency, incorporating sustainable practices that appeal to environmentally conscious manufacturers.

Across the MG, SG, and SGC series, Anetsberger Brothers maintains a commitment to high-quality materials and craftsmanship. Each model is rigorously tested for reliability and performance, ensuring they meet the demands of various industrial applications. The company’s focus on customer feedback has driven continuous enhancement, ensuring that every new iteration of its machines is equipped with the latest technologies and features.

In conclusion, Anetsberger Brothers’ MG, SG, and SGC series represent a blend of tradition and innovation. With their unique features, technological advancements, and commitment to quality, these machines stand ready to meet the challenges of modern manufacturing, making them a valuable addition to any production facility. Whether businesses prioritize speed, versatility, or smart technology, Anetsberger Brothers has a tailored solution to meet those needs.
Top Page Image Contents