TROUBLESHOOTING

SPECIFICATIONS

•PROBLEM:

No audio (POWER LEDs are off). CAUSES and SOLUTIONS:

1.No voltage at Batt + or remote terminal.

–Check all power connections with a VOM.

2.Poor ground connection.

–Check fuses.

3.Microphone power switch is off.

–Check power switch on Mic.

•PROBLEM:

No audio (POWER LEDs are on). CAUSE and SOLUTIONS:

1.No input signal or no speaker signal.

–Check all input connections from source unit.

–Check all speaker connections.

–Check fader control on head unit.

•PROBLEM:

No audio (blue LED on – red LED flashing)**. CAUSES and SOLUTIONS:

1.Over or under voltage.

–Battery voltage above 16 volts or below

10 volts. Check battery and charging system for proper operation.

2.Shorted output.

–Check speaker connections and wires.

•PROBLEM:

No audio (blue LED off, red LED flashing)**. CAUSE and SOLUTION:

1.Thermal protection.

–Turn the system off and allow the amplifier to cool off.

•PROBLEM:

Distorted audio (blue LED on, red LED off). CAUSES and SOLUTIONS:

1.Gain control is set too high, or amplifier or source unit is defective.

–Check gain setting.

–Source unit output is distorted.

2.Short circuit in speaker wires.

–Check speaker wires for shorts or grounds.

•PROBLEM:

Music lacks punch. CAUSE and SOLUTION:

1.Speakers are not connected properly.

–Check speaker connections for proper polarity.

•PROBLEM:

No audio from page. CAUSES and SOLUTIONS:

1.Microphone is not connected properly.

–Check microphone connections.

2.Page level set to minimum.

–Check level control on microphone.

•PROBLEM:

Page is distorted. CAUSES and SOLUTIONS:

1.Page level is too high.

–Reduce page level.

2.Shouting into microphone.

–Hold microphone away from face.

•PROBLEM:

Feedback.

CAUSES and SOLUTIONS:

1.Squealing sound from the speakers when using the Paging system.

–Reduce page level on microphone.

–Increase distance between microphone and mouth while speaking.

6100m

•125W x 2 ch.

•Frequency Response: 10Hz – 40kHz

•Signal-to-Noise Ratio: 91dB

•Line-Level Input Sensitivity: 250mV – 6V

•Speaker-Level Input Sensitivity: 6V – 16V

•Speakers: 11" x 18" x 14-1/2"

•Amplifier: 8-1/8" x 8" x 2-3/8"

•Microphone: 1-1/4" x 2-1/2" x 3-5/8"

•Min. Speaker Impedance: 4 ohms, stereo

6000m

•Power Handling: 150W

•Peak Power Handling: 450W

•Sensitivity: 93dB @ 2.83V

•Frequency Response: 80Hz – 20kHz

•Impedance: 4 ohms

•Polypropylene Cone

•Cast-Polymer Basket

•CMMD™ Tweeter

•Rubber Surrounds

•UV-Resistant

•Water-Resistant

•Salt-Spray-Resistant

•11" x 18" x 14-1/2"

2100m

**NOTE: The microphone has a blue power LED and the amplifier has a red power LED.

Features, specifications and appearance are subject to change without notice.

Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4INF (4463) • FAX 516.682.3556 • www.infinitysystems.com © 2004 Harman International Industries, Incorporated

Infinity is a registered trademark, and CMMD is a trademark, of Harman International Industries, Incorporated. CMMD patent nos. 6,327,372 and 6,404,897.

Part No. 6100MOM6/04 • Printed 6/04

•125W x 2 ch. @ 4 ohms

•150W x 2 ch. @ 2 ohms

•250W x 1 ch. @ 4 ohms

•Frequency Response: 10Hz – 40kHz

•Signal-to-Noise Ratio: 91dB

•Line-Level Input Sensitivity: 250mV – 6V

•Speaker-Level Input Sensitivity: 6V – 16V

•8-1/8" x 8" x 2-3/8"

•Min. Speaker Impedance: 2 ohms, stereo 4 ohms, bridged

Page 7 Page 8
Page 8
Image 8
Infinity 6100M, 6000M, 2100m warranty Troubleshooting Specifications, Problem
Page 7 Page 8

2100m, 6100M, 6000M specifications

Infinity 6000M, 6100M, and 2100M are part of a cutting-edge series of multi-purpose devices that cater to various needs, from high-performance computing to user-friendly wireless experiences. Each model comes packed with features that are designed to enhance productivity and deliver streamlined performance.

The Infinity 6000M is renowned for its powerful processing capabilities, accommodating advanced applications like 3D modeling, video editing, and data analysis. Armed with the latest processor technology, it supports multi-core operations, allowing users to run multiple applications simultaneously without compromising performance. The high-resolution display enhances clarity and provides an immersive visual experience, making it ideal for graphic designers and creatives.

On the other hand, the Infinity 6100M focuses on connectivity and mobility. Equipped with cutting-edge wireless technology, including Wi-Fi 6 and Bluetooth 5.0, it enables seamless connections with minimal latency. This model is favored by professionals on the go, as it strikes the perfect balance between performance and portability, allowing users to work effectively from any location. Additionally, its long-lasting battery life ensures uninterrupted usage throughout the workday.

The Infinity 2100M is designed with efficiency and usability in mind. Its compact form factor makes it an excellent choice for users with limited workspace. Despite its smaller size, it boasts an impressive range of features, including fast processing speeds and ample storage capacity. The intuitive interface and smart technology simplify the user experience, making it approachable for all skill levels.

All three models offer robust security features, ensuring that user data remains protected. Advanced encryption standards and biometric authentication provide peace of mind, especially for users handling sensitive information.

Moreover, each model supports various peripherals and expansions, making them adaptable to individual user requirements. Whether you’re a designer requiring high graphics performance with the 6000M, a traveling professional with the 6100M, or someone seeking a compact solution with the 2100M, the Infinity line has something to cater to diverse needs.

In summary, the Infinity 6000M, 6100M, and 2100M epitomize innovation in technology, combining powerful performance, versatility, and user-centric design to meet the demands of modern users across various fields.
Top Page Image Contents