Aussie 8462, 8362 specs

7. WARNING! If your grill catches on fire:

•If the fire involves the cylinder, leave it alone, evacuate the area and call the fire department.

•If the fire involves one of the hoses, and you can safely reach the propane cylinder valve, shut the valve off by turning LP cylinder valve handle clockwise to a full stop.

•If the fire is in the grill portion and you can safely reach the control knobs, turn them off by turning knobs clockwise. If you cannot safely reach the control knobs or the LP cylinder valve, call the fire department.

•If there is any type of fire that threatens either personal safety or endangers property, call the fire department.

8.Check the Bottom Body Panel for grease buildup. Remove excess grease to avoid a grease fire in the pan.

Never use the grill without Bottom Body Panel and Grease Tray in place.

9. WARNING! If you notice grease or other hot material dripping from the grill onto valve, hose, or regulator, turn off gas supply immediately. After the grill has cooled, determine the cause and correct it. After cleaning the valve, hose and regulator, perform a leak test before continuing use. See Before Using Your LP Gas Grill section of this manual for correct leak test procedures.

10.This installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1, or CAN/CGA-B149.2, Propane Installation Code.

11.If an external electrical source is utilized, the outdoor cooking appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Codes, ANSI/NFPA 70, or the Canadian Electrical Code. CSA C22.1.

12.Keep any electrical supply cord and the fuel supply hose away from any heated surfaces. Electric cords should be placed away from walkways to avoid a tripping hazard.

13.Combustible materials should never be within

36 in. of the back or sides of your LP gas grill.

14.The Vinyl grill cover must be removed and placed at least 36 inches from LP gas grill while in use. The grill cover is made of a flammable material. The grill must be cooled before putting the cover back on the grill.

15. WARNING! Always Store LP Cylinders upright and where temperatures do not exceed 125 degrees Fahrenheit. Never store a spare or disconnected LP cylinder under or near this LP gas grill.

16.Check the LP gas grill for gas leaks and burner obstructions before each use.

WARNING! Do not use a flame to check for gas leaks. See Before Using Your LP Gas Grill section of this manual for correct leak test procedures. A clogged burner tube can lead to a fire beneath grill.

17. DANGER! If you see, smell, or hear the hiss of escaping gas from the LP cylinder:

A.Get away from the cylinder.

B.Do not attempt to correct the problem yourself.

C.Call your local fire department.

18. WARNING! Do not operate an LP gas grill if you have knowledge of or suspect a gas leak.

19.Always inspect the gas hose and regulator assembly before each use. Always turn the LP cylinder to the “Off” position before inspecting parts. If the hose is cut, damaged, or showing signs of excessive abrasion or wear, do not use the LP gas grill. Contact the manufacturer, as the hose must be replaced with an assembly specified by the manufacturer prior to further use of the LP gas grill.

20. WARNING! Before lighting the LP gas grill, open hood to prevent an explosion from gas build-up.

See Operation of Your LP Gas Grill section

21.If any burner does not light, turn off all gas control knobs. Leave the hood open and wait five minutes before attempting to light.

22.If any burner goes out during operation, turn off all gas control knobs. Open the hood and wait five minutes before attempting to light.

23.Excercise reasonable care when using this LP gas grill. Never leave grill unattended during use or cleaning.

24.Never allow children to operate or play near an LP gas grill. Keep animals and bystanders out of the grill area.

25.Always turn off the LP gas cylinder at the cylinder valve when not in use. Allow grill to cool before handling parts or cleaning.

26. WARNING! Do not move an LP gas grill when in use or hot.

27. WARNING! Never touch hot surfaces. Use heat resistant gloves, long-handled tongs, or cooking mitts at all times. The grill will become very hot. Open the hood carefully when cooking to avoid burns from the hot air and steam trapped inside.

28.Use only the hose and regulator assembly

that is supplied with your LP gas grill and/or specified by the manufacturer.

8362, 8462 specifications

Aussie 8462,8362 are two advanced models that showcase the innovation in modern technology, particularly in the field of telecommunications and data transmission. These models are a testament to Australia’s growing influence in the tech sector, particularly in developing solutions that cater to both local and international markets.

One of the main features of the Aussie 8462 is its exceptional data processing capacity. This model is engineered to handle large volumes of data with remarkable efficiency, making it ideal for businesses that rely on real-time analytics. Additionally, the 8462 incorporates advanced encryption technologies, ensuring that data remains secure during transmission. This feature is increasingly important in an era where data breaches are rampant, and businesses must prioritize customer privacy.

On the other hand, the Aussie 8362 focuses more on connectivity and versatility. It has been designed to support multiple connectivity options, including 5G, LTE, and Wi-Fi 6. This variety allows it to cater to a wide range of devices, ensuring seamless communication in diverse environments. Moreover, the 8362 is equipped with smart routing capabilities that optimize network traffic, thereby enhancing overall performance and reducing latency.

Both models employ state-of-the-art artificial intelligence algorithms to facilitate predictive analysis and automate network management tasks. This functionality significantly reduces the need for manual intervention, allowing IT departments to focus on strategic initiatives rather than routine maintenance.

In terms of physical characteristics, both the 8462 and 8362 boast rugged and compact designs, suitable for various installation environments. They are built with durable materials that can withstand extreme weather conditions, making them ideal for outdoor deployments. Furthermore, their energy-efficient architecture ensures that they consume less power while delivering high performance, contributing to sustainability efforts.

In conclusion, the Aussie 8462 and 8362 represent a significant advancement in telecommunications technology. Their integration of robust security features, advanced connectivity options, and intelligent network management systems makes them suitable for modern businesses looking to thrive in a digital-first world. As Australia continues to innovate in this space, these models set a benchmark for future developments in telecommunications technology.