3D Connexion V300 instruction

12.3 SECUR ET – VMB Wall Mounting Bracket

The VMB is wall mounting bracket for the attachment of a VMY, available in both black

FIG 1.and white finishes, allowing the user secure the Tannoy V300 loudspeaker in either portrait or landscape orientations to a wall.

The Tannoy V300 loudspeaker is attached to the bracket using the accessories supplied.

This wall-mounting bracket has a larger wall plate than previous models to maximise the integrity of fixing obtained. There are also two holes either side of the fixing beam to allow the speaker cable the pass through the wall plate and along the fixing beam to the terminal panel resulting in a more discrete installation.

The fixing beam on the VMB has a number of mounting points from which the VMY can be attached at varying distances from the mounting surface.

Only the screws, fasteners, shakeproof and plain washers specified on figure 3.

! should be used to assemble the VMB bracket

FIG 2.

			2
			3
FIG 3.
			5
Number on Fig 3.	Description	Quantity
1	VMB Wall Bracket	1	6
2	M10 Nyloc Nut	1	6
2	M10 Nyloc Nut	1
3	M10 Plain Washer	1
4	30mm Square Blank Plug	1
5	Nylon Spacer	1
6	M10 x 85mm Screw	1