12.5 SECUR – ET VTH Pole Mount
The Tannoy V300 loudspeaker is fitted as standard with a blanking plate on the base of the cabinet. However, should you ever wish to mount the V300 onto a standard 35mm pole mount this blanking plate can be quickly and easily removed and replaced by a VTH pole mount. The same screws which secure the blanking plate should be used to secure the VTH in position.
12.6SECUR – ET VCS Ceiling Saddle
VCS
The VCS ceiling saddle available in both black and white finishes, and is to be used in conjunction with the VMY and a length of M10 threaded rod (not supplied by Tannoy Limited). The VCS ceiling saddle allows the Tannoy V300 loudspeaker to be suspended at a user defined distance from the ceiling as shown in Figure 1.
Included with the VCS is an M10 nut. This should be used to secure and lock the threaded rod in place at the top of the ceiling saddle.
Fig 1.
12.7 SECUR – ET VPC Pole Clamp
The VPC pole clamp can be used along with the VMY yoke bracket to suspend a Tannoy V300 loudspeaker from an overhead bar, truss or suitable structure. Only the parts supplied should be used to secure the VPC to the VMY yoke bracket.
The following items are included with each VPC:-
Description | Quantity |
VPC Pole Clamp | 1 |
M10 Washer | 1 |
M10 x 50mm Screw | 1 |
M10 Nyloc Nut (Black) | 1 |