Lighting the Grill Using the Ignitor

To reduce the risk of serious bodily injury or death:

·Open Hood before lighting the grill to prevent an explosion from any gas accumulation.

·If lighting attempts fail, or the burners go out during operation, turn all control knobs “Off” to dissipate any accumulation of gas. Accidental ignition could occur. Wait five minutes before repeating lighting procedure.

·Light both left and right sides of burner to prevent gas from accumulating.

1.	Open the Hood.
2.	Important: Make sure all control knobs are turned
	“Off”. (FIG. 13A)
3.	Turn the LP Gas Cylinder valve open counter
	clockwise until it stops. (FIG. 13B)
4.	Push the left control knob in and turn counter
	clockwise to the High flame position. (FIG. 13C & 13D)
5.	Pause 4 seconds and push the ignitor button in
	several times to light the burner. Listen for the spark
	ignition and look to make sure the burner is lit. If no
	spark, see (FIG. 13E) and Troubleshooting Section.
6.	From the “Off” position, push right control knob in
	and turn counterclockwise to the High position. Your
	grill has a crossover ignition system that allows the
	burner to light each side successively. Make sure the
	right side of burner is lit.
7.	If either side of burner fails to light, repeat Step 4.
	If a burner goes out during operation, turn all knobs to
	the “Off” position and close the LP cylinder valve to
	dissipate any accumulated gas. Open hood and wait
	five minutes before attempting to relight the grill.
	If any or all burners fail to light after three or four
	attempts following Steps 4-6, turn all knobs to the
	“Off” position and close the LP gas cylinder valve to
	dissipate any accumulated gas. Wait five minutes; then
	repeat the lighting procedures. NOTE: If the burner
	still fails to light, refer to the Troubleshooting Section.
	The burner can also be lit manually, see Manual

FIG. 13B

Right Control Knob

Left Control Knob

Ignitor Button

FIG. 13C

Control Knob

in HIGH position

FIG.13D

Lighting of the Grill.

8. After ignition, turn the control knobs to “High” for 3-5

minutes and close the Hood to preheat the grill.

Preheat the grill before every cooking session.

Gas Collector

Tab

Gas Collector

Box

Electrode

3/16” GAP

Control Knob

in OFF

position

FIG.13A

If no spark, pinch together or open Gas Collector Tab to adjust 3/16” gap between electrode tip and edge of Gas Collector Tab.

7110.7.641 specifications

The Aussie 7110.7.641 is a versatile and robust machinery specifically designed to enhance productivity in various sectors, particularly in agriculture and construction. As part of its standout features, this model offers an impressive balance of power and efficiency, making it a preferred choice among professionals in these industries.

One of the key characteristics of the Aussie 7110.7.641 is its powerful engine, which delivers exceptional torque and horsepower. This allows the machine to handle heavy loads, navigate challenging terrains, and perform demanding tasks with ease. The well-engineered drivetrain ensures that power is effectively transmitted to the wheels, enhancing the overall maneuverability of the machine while minimizing fuel consumption.

The Aussie 7110.7.641 also incorporates state-of-the-art technologies that boost its performance and user-friendliness. It comes equipped with an advanced digital control system that enables operators to monitor machine performance in real time. This system provides critical information such as fuel efficiency, load weight, and operational status, allowing users to optimize their workflows and reduce downtime.

In addition to its advanced control system, the Aussie 7110.7.641 features ergonomic design elements that prioritize user comfort and safety. The operator's cabin is designed with adjustable seating, intuitive controls, and excellent visibility, making it easy for operators to maneuver the machine even in tight spaces. Safety features such as rollover protection systems and robust guarding ensure that users can operate the machine with confidence in various environments.

Furthermore, the Aussie 7110.7.641 supports a variety of attachments, enhancing its versatility. This adaptability allows it to perform multiple tasks, from tilling and plowing in agricultural settings to lifting and hauling materials in construction. With its sturdy construction and high-quality materials, this machine is built to endure the rigors of daily use.

Overall, the Aussie 7110.7.641 stands out in its category for its blend of power, efficiency, and advanced technology. Its ability to tackle diverse applications while prioritizing operator safety and comfort makes it an essential asset for businesses looking to improve productivity and streamline operations.