Aussie 7110.7.641 manual Troubleshooting Cont’d

Page 20

TROUBLESHOOTING (Cont’d)

Problem

Possible Cause

Solution

Burners will not light

 

LP-Excess flow valve tripped

using the ignitor

 

in regulator.

 

 

Vapor lock in connections.

 

 

 

 

 

 

 

 

 

 

Obstructions in burners

 

 

 

 

 

 

 

 

Wet Electrodes and burners

 

 

 

 

 

 

 

 

Wire loose or disconnected

 

 

 

 

 

 

 

 

Wire shorting (sparking

 

 

between ignitor and electrode

 

 

 

Turn control knobs to “off” position and turn LP gas cylinder handle clockwise until it stops. Wait five minutes. Relight LP gas grill. If flame continues to be low, turn off gas at cylinder and grill. Disconnect the regulator from the LP gas cylinder. Reconnect the regulator to the LP gas cylinder. Perform a leak test. Relight grill. This will reset the excess flow valve.

Clean the burners. (See How to Clean the burners in Care and Maintenance.)

Dry electrode with clean cloth. Air dry or use blow dryer.

Reconnect the wire.

Replace ignitor wire/electrode assembly (Call the Customer Service Department).

Burners will not light

Burners not assembled

using a match

correctly

 

LP-gas cylinder is empty

 

LP-Excess flow valve tripped

 

in regulator

See re-assembly after cleaning in Care and Maintainance.

Take LP gas cylinder to licensed LP gas supplier to be refilled

Turn control knobs to “off” position and turn LP gas cylinder handle clockwise until it stops. Wait five minutes. Relight LP gas grill. If flame continues to be low, turn off gas at cylinder and grill. Disconnect the regulator from the LP gas cylinder. Reconnect the regulator to the LP gas cylinder. Perform a leak test. Relight grill. This will reset the excess flow valve.

Regulator Coupling nut is not

Tighten coupling nut by hand about one-half to three quarters

fully connected to LP cylinder

turn. Do not use tools.

Obstructions in burners

See How to Clean the Burners in Care and Maintainance.

 

 

Low flame or low

LP-Gas in LP cylinder is low

Check LP gas cylinder. Refill if necessary.

 

heat

 

 

OR Natural Gas supply pressure is low

Excess flow valve tripped in regulator

Turn control knobs to “off” position and turn LP gas cylinder handle clockwise until it stops. Wait five minutes. Relight LP gas grill. If flame continues to be low, turn off gas at cylinder and grill. Disconnect the regulator from the LP gas cylinder. Reconnect the regulator to the LP gas cylinder. Perform a leak test. Relight grill. This will reset the excess flow valve.

Flames blow out

Flare up

Persistent grease fire

Unable to fill LP tank

High or gusting winds

Gas in LP cylinder is low

Excess flow valve tripped

Grease build up

Excessive fat in meat

Grease trapped around burner system

Some dealers have older fill nozzles with worn threads.

Turn front of grill away from wind or increase flame height.

Check LP gas cylinder. Refill if necessary.

See “Low flame” problem above.

Clean grill.

Trim fat from meat before grilling.

Turn control knobs “off” and turn handle of LP cylinder clock- wise until it stops. Open hood carefully and let fire burn out. After the grill cools, remove and clean all parts.

The worn nozzles don’t have enough “bite” to engage the valve. Try another licensed LP dealer.

20

Image 20
Contents LP Gas Grill Assembly and Use Manual Contents Assembly InstructionsParts Illustrations Page LP Cylinder Clip Axle PIN Assemble Hood/Bowl to Cart 23 M4 Wingnut Left Side Right Side Fabric Panel Right Side CONNECTING/DISCONNECTING the GAS Using GASOperating Your LP GAS Grill LP GAS CylinderBefore Using Your GAS Grill Installation CodesSelecting a Location Performing a Leak TestLighting the Grill Using the Ignitor Grill Cooking Manual Lighting the GrillCheck Your Flame Warming Rack Roasting CookingOperating the GAS Grill END of Cooking SessionCare and Maintenance Cleaning the GrillStorage Gas Leaks and Fire Emergencies Troubleshooting Cont’d Important Notice Meco Corporation Limited Warranty Aussie

7110.7.641 specifications

The Aussie 7110.7.641 is a versatile and robust machinery specifically designed to enhance productivity in various sectors, particularly in agriculture and construction. As part of its standout features, this model offers an impressive balance of power and efficiency, making it a preferred choice among professionals in these industries.

One of the key characteristics of the Aussie 7110.7.641 is its powerful engine, which delivers exceptional torque and horsepower. This allows the machine to handle heavy loads, navigate challenging terrains, and perform demanding tasks with ease. The well-engineered drivetrain ensures that power is effectively transmitted to the wheels, enhancing the overall maneuverability of the machine while minimizing fuel consumption.

The Aussie 7110.7.641 also incorporates state-of-the-art technologies that boost its performance and user-friendliness. It comes equipped with an advanced digital control system that enables operators to monitor machine performance in real time. This system provides critical information such as fuel efficiency, load weight, and operational status, allowing users to optimize their workflows and reduce downtime.

In addition to its advanced control system, the Aussie 7110.7.641 features ergonomic design elements that prioritize user comfort and safety. The operator's cabin is designed with adjustable seating, intuitive controls, and excellent visibility, making it easy for operators to maneuver the machine even in tight spaces. Safety features such as rollover protection systems and robust guarding ensure that users can operate the machine with confidence in various environments.

Furthermore, the Aussie 7110.7.641 supports a variety of attachments, enhancing its versatility. This adaptability allows it to perform multiple tasks, from tilling and plowing in agricultural settings to lifting and hauling materials in construction. With its sturdy construction and high-quality materials, this machine is built to endure the rigors of daily use.

Overall, the Aussie 7110.7.641 stands out in its category for its blend of power, efficiency, and advanced technology. Its ability to tackle diverse applications while prioritizing operator safety and comfort makes it an essential asset for businesses looking to improve productivity and streamline operations.