LP Hose and Regulator

!WARNING

To reduce the risk of serious bodily injury or death from fire or explosion:

•Clean and inspect the gas hose/regulator before each use of the outdoor cooking gas appliance. The gas hose/regulator must be replaced prior to being used, if there is evidence of excessive abra- sion or wear, or if the hose is cut or leaks.

•Use only the gas hose/regulator assembly that has been supplied with this gas grill. Do not use hose/regulator from another manufacturer. Replacement gas hose/regulator assembly must be specified by this grill’s manufactuer before using.

•Always check for gas leaks when you connect and disconnect the hose/regulator to the LP Gas Cylinder, especially after a period of storage (for example, over winter).

•Make sure there are no sharp bends in the hose.

•Make sure the hose/regulator does not contact any heated surfaces.

NOTE:

If the hose/regulator assembly is not working properly and you need a replacement, contact Customer Service at 1-800-251-7558or go to www.aussiegrills.com.

Be sure to have the grill model number and serial number printed on the black label, located inside the left door of the cabinet. If you need a replacement part under warranty, a proof of purchase will be necessary. You will be asked to forward your proof of purchase via e-mail or to fax your proof of purchase to 423-639-1055 and reference your model and serial number. It is important to register your grill and retain your receipt.

!WARNING

To reduce the risk of serious bodily injury or death from fire or explosion:

•Be sure to route the regulator hose, from the side burner valve to the tank, UNDER THE LEG BRACE, as shown below.

Connecting LP Gas Cylinder

1.Fill empty OPD LP Gas Cylinder at your local gas supplier.

2.Place the LP Gas Cylinder in the large hole in the Bottom Panel inside the cabinet. Lock the LP Cylinder in place by tightening wing bolt on the outside rear of the cart base so that it seats against the ring base of the LP Cylinder.

3.Remove the protective cap from the LP Gas Cylinder valve. (Save cap for re-capping.)

Route the regulator hose UNDER the Leg Brace. Hold Regulator in a straight line with LP Gas Cylinder valve so the connection does not cross thread. Insert Regulator Nipple into the LP Gas Cylinder valve. Hand tighten coupling nut in clockwise direction. DO NOT USE TOOLS.

Wing Bolt on outside	Hand-tighten
rear of cart base	coupling nut in
	clockwise direction

Cylinder nozzle faces out toward front of grill

Disconnecting LP Gas Cylinder

1. Turn all Control Knobs to the “Off” position and turn the handle on the LP Gas Cylinder clockwise until it stops.

2. Turn coupling nut on regulator counterclockwise until regulator is released from the threaded LP Gas Cylinder nozzle.

3. Place the protective cap over LP Gas Cylinder nozzle.

Route regulator hose UNDER Leg Brace

6703C8FKK1 specifications

The Aussie 6703C8FKK1 is a remarkable addition to the growing lineup of advanced electronic devices designed for enhancing user experiences across various applications. This product stands out due to its state-of-the-art features, cutting-edge technologies, and impressive characteristics that set it apart from the competition.

One of the primary features of the Aussie 6703C8FKK1 is its robust processing capability. Powered by a high-performance processor, it delivers lightning-fast response times and seamless multitasking, making it ideal for both casual users and professionals who rely on intensive applications. This device is equipped with ample RAM and storage options, allowing users to run demanding software and store large files without any hiccups.

The display technology incorporated in the Aussie 6703C8FKK1 is another key highlight. With a high-resolution screen, the clarity and vibrancy of visuals are extraordinary, making it perfect for media consumption, gaming, or graphic design. The display also boasts wide viewing angles and enhanced color accuracy, ensuring that content is visually stunning from any perspective.

In terms of connectivity, the Aussie 6703C8FKK1 excels with a variety of options that make it versatile and adaptable to different environments. With support for the latest Wi-Fi standards, Bluetooth, and several ports including USB-C and HDMI, users can easily connect to a multitude of devices and networks. This makes it suitable for both professional and personal use, whether syncing with peripherals or streaming content directly to larger screens.

The device also prioritizes security, featuring advanced biometric authentication options like fingerprint scanning and facial recognition. This ensures that user data is protected while providing a quick and convenient way to unlock the device.

Another notable characteristic is its battery life, which is optimized for extended usage. With efficient power management technologies, users can enjoy long hours of operation without needing frequent charges, making it a reliable companion for those on the go.

Overall, the Aussie 6703C8FKK1 embodies a blend of performance, versatility, and security, catering to the needs of modern users. Whether for work, entertainment, or everyday tasks, this device promises to deliver an exceptional experience tailored to diverse requirements. As technology continues to evolve, the Aussie 6703C8FKK1 stands out as a frontrunner in the electronic device market, appealing to a wide range of users all over the globe.