Aussie 6703C8FKK1 manual Clean the Burners. See How to Clean Burners in Care, Maintenance

Page 31

31

Troubleshooting

Problem

 

Possible Cause

 

Solution

Regulator coupling nut is not fully connected to LP cylinder

LP-Excess flow valve tripped in regulator

Vapor lock in connections

Tighten coupling nut by hand about one-half to three quar- ters additional turn. Do not use tools.

Turn Control Knobs to “Off” position and turn LP Gas Cyl- inder handle clockwise until it stops. Wait five minutes. Relight LP gas grill. If flame continues to be low, turn off gas at LP Gas Cylinder and grill. Disconnect the regulator from the LP Gas Cylinder. Reconnect the regulator to the LP Gas Cylinder. This will reset the excess flow valve Perform a leak test. Relight grill.

 

 

Obstructions in Burners

 

Clean the Burners. See “How to Clean Burners” in Care

 

 

 

 

and Maintenance.

 

 

Wet Electrodes and Burners

 

Dry Electrode with clean cloth. Air dry or use blow dryer.

 

 

Wire loose or disconnected

 

Reconnect the wire.

 

 

Wire shorting (sparking

 

Replace Igniter Wire/Electrode assembly.

 

 

between Igniter and Electrode)

 

(Call the Customer Service Department)

 

 

 

 

 

Burners will not light Burners not assembled correctly

 

See re-assembly after cleaning in Care and Maintenance.

using a match

 

 

 

 

LP Gas Cylinder is empty

 

Take LP Gas Cylinder to licensed LP gas supplier to be refilled.

 

 

 

 

Turn Control Knobs to “Off” position and turn LP Gas Cyl-

 

 

LP-Excess flow valve tripped in

 

inder handle clockwise until it stops. Wait five minutes. Relight

 

 

regulator

 

LP gas grill. If flame continues to be low, turn off gas at LP Gas

 

 

 

 

Cylinder and grill. Disconnect the regulator from the LP Gas

 

 

 

 

Cylinder. Reconnect the regulator to the LP Gas Cylinder. This

 

 

 

 

will reset the excess flow valve Perform a leak test. Relight grill.

Regulator Coupling nut is not fully connected to LP Gas Cylinder

Obstructions in Burners

Low flame or low heat LP-gas in LP Gas Cylinder is low

Excess flow valve tripped in regulator

Tighten Regulator Coupling nut by hand about one-half to three quarters additional turn. Do not use tools.

See “How to Clean Burners” in Care and Maintenance.

Check LP Gas Cylinder. Refill if necessary.

Turn Control Knobs to “Off” position and turn LP Gas Cyl- inder handle clockwise until it stops. Wait five minutes. Relight LP gas grill. If flame continues to be low, turn off gas at LP Gas Cylinder and grill. Disconnect the regulator from the LP Gas Cylinder. Reconnect the regulator to the LP Gas Cylinder. This will reset the excess flow valve Perform a leak test. Relight grill.

Flames blow out

High or gusting winds

Turn front of grill away from wind or increase flame height.

 

Gas in LP cylinder is low

Check LP Gas Cylinder. Refill if necessary.

 

Excess flow valve tripped

See “Low flame” problem above.

Image 31
Contents For Outdoor Household Use Only. Not for Commercial Use 6703C8FKK1Carbon Monoxide Hazard Tools Required for Assembly Supplied with GrillPreparation for Assembly ContentsBox Description Packing ListStep Left Leg Frame Assembly Assembly InstructionsStep Right Leg Frame Assembly Step Wheel Assembly Step Cart Frame AssemblyStep Cylinder Blocking Wire Assembly Step Fabric Privacy Panel AssemblyStep Hood/Body To Cart Assembly Step Side Table Assembly Step Side Burner Igniter Wire Connection Step Side Burner Valve AssemblyFoil Pan/Grease Pan Assembly Step Side Burner Control Knob AssemblySide Burner Grid Assembly Step Bottom Body Panel AssemblyStep Battery in Igniter Installation Step Warming Rack / Flame Diffuser / Cooking Grid AssemblyUsing Gas Connecting/Disconnecting the GasLP Gas Cylinder LP Hose and Regulator Connecting LP Gas CylinderPerforming a Leak Test Before Using Your LP Gas GrillInstallation Codes Selecting a LocationHow to Perform a Leak Test First Time USE and as required Page Off position Lighting the Grill Using the Pulse-Spark IgnitorManual Lighting of the Grill on Manually Lighting the Grill Check The Flame Lighting the Side BurnerManually Lighting the Side Burner Manually Lighting the Side Burner Grill Cooking Direct Method Cooking On the Gas GrillDirect Cooking on the Grids Roasting Indirect MethodIndirect Cooking Roasting End of Cooking Session Warming RackCleaning the Grill Care and MaintenanceHow to Clean the Burners Open up Storage Emergencies TroubleshootingMaintenance Clean the Burners. See How to Clean Burners in CareSee How to Clean Burners in Care and Maintenance Important Notice Page Parts Illustration- Model 6703C8FKK1 Key Description Quantity Parts List- Model 6703C8FKK1Meco Corporation Limited Warranty Limited Warranty

6703C8FKK1 specifications

The Aussie 6703C8FKK1 is a remarkable addition to the growing lineup of advanced electronic devices designed for enhancing user experiences across various applications. This product stands out due to its state-of-the-art features, cutting-edge technologies, and impressive characteristics that set it apart from the competition.

One of the primary features of the Aussie 6703C8FKK1 is its robust processing capability. Powered by a high-performance processor, it delivers lightning-fast response times and seamless multitasking, making it ideal for both casual users and professionals who rely on intensive applications. This device is equipped with ample RAM and storage options, allowing users to run demanding software and store large files without any hiccups.

The display technology incorporated in the Aussie 6703C8FKK1 is another key highlight. With a high-resolution screen, the clarity and vibrancy of visuals are extraordinary, making it perfect for media consumption, gaming, or graphic design. The display also boasts wide viewing angles and enhanced color accuracy, ensuring that content is visually stunning from any perspective.

In terms of connectivity, the Aussie 6703C8FKK1 excels with a variety of options that make it versatile and adaptable to different environments. With support for the latest Wi-Fi standards, Bluetooth, and several ports including USB-C and HDMI, users can easily connect to a multitude of devices and networks. This makes it suitable for both professional and personal use, whether syncing with peripherals or streaming content directly to larger screens.

The device also prioritizes security, featuring advanced biometric authentication options like fingerprint scanning and facial recognition. This ensures that user data is protected while providing a quick and convenient way to unlock the device.

Another notable characteristic is its battery life, which is optimized for extended usage. With efficient power management technologies, users can enjoy long hours of operation without needing frequent charges, making it a reliable companion for those on the go.

Overall, the Aussie 6703C8FKK1 embodies a blend of performance, versatility, and security, catering to the needs of modern users. Whether for work, entertainment, or everyday tasks, this device promises to deliver an exceptional experience tailored to diverse requirements. As technology continues to evolve, the Aussie 6703C8FKK1 stands out as a frontrunner in the electronic device market, appealing to a wide range of users all over the globe.