Broilmaster P4XN-1 Propane Cylinder Safety, Cylinder Storage, Connection Requirements, See Figure

Page 19

PROPANE GAS GRILLS

Propane Cylinder Safety

Liquid Propane (LP) gas has a long history of safe use when the safety precautions provided in this manual are followed.

Failure to follow these safety precautions could result in a fire or explosion causing property damage or personal injury.

Propane gas cylinders should always be handled, stored, and transported with extreme caution in a secured upright position.

Never attempt to use or repair a propane gas cylinder that has been damaged. Never attempt to use or repair a cylinder with a faulty or damaged valve outlet. A cylinder that has been dropped, dented, or otherwise damaged must be replaced.

A propane gas cylinder should never be transported in the pas- senger area of a vehicle.

Keep cylinders out of direct sunlight and never apply any other source of direct heat to them.

When refilling your cylinder, always insist on a reputable, qualified gas dealer. Your propane gas cylinder is filled by weight, and should never exceed eighty percent (80%) of its weight limit. If the cylin- der is not completely empty, the gas dealer must make necessary adjustments to ensure it is not overfilled. Never use an overfilled Propane gas cylinder.

installation shall be in accordance with CAN/CGA-B149.2 Propane Installation Code, or CAN/CGA-B149.1 Natural Gas Installation Code, and local codes where applicable. Consult your local gas supplier or propane gas dealer for code regulations and recom- mended procedures.

Warning: Broilmaster® Premium Gas Grills require Liquid Propane (LP) cylinders equipped with an Overfill Protection Device (OPD). An overfilled or improperly filled Propane cyl- inder can be dangerous.

Always use the pressure regulator and hose assembly supplied with your Propane gas grill.

Note: Not all valve and cylinder combinations are compatible. Check warning tag on valve and cylinder as well as external fitting threads.

All Broilmaster® pressure regulators and hose assemblies require Propane cylinders with a Type 1 connection device as illustrated.

See Figure 1.

Cylinder Storage

Your grill must be stored outdoors in a well ventilated area if the cylinder is attached to it.

Disconnected cylinders must have a threaded valve plug tightly installed and must not be stored in any building, garage, or other enclosed area.

Flammable materials (gasoline, grill covers, etc.) must not be stored in the cylinder enclosure.

Always store Propane cylinders in a secured upright position, out of the reach of children.

Connection Requirements

Caution: Never use Liquid Propane (LP) gas in a grill designed

 

for Natural gas, or Natural gas in a grill designed for Liquid

 

Propane gas. Questions regarding different types of gases

 

should be directed to your local gas supplier.

Figure 1

 

Installation must conform to local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1. In Canada,

B101623-5-1012

Page 19

Image 19
Contents Models If YOU Smell GAS Empire Comfort Systems, Inc CongratulationsTable of Contents Master Parts Distributor List HOW to Order Repair PartsParts Not Under Warranty Warranty PartsP3X Series Parts Diagram P3SX P3SXN P3X P3XN P3XF P3XFN Index Part Description Part NumberP4X Series Parts Diagram P4XN P4XF P4XFN P4X Series Parts ListH3X Series Parts Diagram Index No Part Description Part Number H3X Series Parts ListH3X H3XN H4X Series Parts Diagram H4X H4XN H4X Series Parts ListR3 Series Parts Diagram Index Description Part Number R3 Series Parts ListR3N R3B R3BN Recommended Tools Grill AssemblyWarranty Terms Before You BeginWarranty Terms Grill Location Propane GAS GrillsCylinder Requirements See Figure Propane Cylinder SafetyCylinder Storage Connection RequirementsConnecting to Propane Gas / Cylinder Retention Means Pressure Regulator and Hose AssemblyClockwise Gas Type Natural GAS GrillsH4XN-1 Phillips Truss Head Screw 1/4-20 X 1 1/2 Hardware PackPhillips Truss Head Screw 10-24 X 3/4 HEX NUT, Lock Phillips Truss Head Screw 10-24 XInstalling Control Panel Shield Installing the Hose and Regula- torInstalling Control Panel See Figures 8 Ignitor AssemblyInstalling the Ignitor Installing Control KnobsWind Deflector Series Burner Shown Installing the BurnerSeries Shown Handle Lid Stop Installing Flare BustersP3X P4X Cleaning Installing RacksSee b Operating Instructions Air Shutter AdjustmentOperation Propane & Natural GAS Grills Checking for Gas LeaksPreheating Electrical AccessoriesOperation Before CookingBurn Off MaintenanceProblem Cause Solution TroubleshootingR3-1, R3N-1 ,R3B-1, R3BN-1 R3 only R3B onlyR3B only Description Part Number Quantit Supplied Safety Practices to Avoid Personal Injury Safety PrecautionsOutdoor USE only Grill Assembly Grill Assembly Grill Assembly Lid stop assembly hardware GAS Conversion to Natural GAS GAS Conversion to Natural GAS General Overview Infrared CookingSteak 1 Thick Infrared Cooking Sample Times & Grid PositionsCooking Grid Position Using the Ignitor Air Shutter Adjustment For R3B Series OnlyAvoid Water DAM AGE to Burner Clean burner venturi tubes as follows Blue Flame Burner MaintenanceGeneral Overview Infrared Burner MaintenanceBurn Off Standard CleaningProblem Cause Solution Appliance Service History Appliance Service History Appliance Service History Broilmaster
Related manuals
Manual 52 pages 56.28 Kb Manual 56 pages 55.84 Kb

P3SXN-1, P3SX-1, H3XN-1, P4XF-1, P3XF-1 specifications

Broilmaster is a well-respected name in the world of grilling, known for its high-quality, durable, and innovative products. Among its impressive lineup, the H3XPK-1, H4X-1, P3XFN-1, P3XN-1, and H4XN-1 models stand out as exceptional choices for barbecue enthusiasts. Each model integrates advanced technologies and features designed to enhance the grilling experience.

The Broilmaster H3XPK-1 is celebrated for its robust construction and versatility. Built with a heavy-duty stainless steel burners, it ensures even heat distribution for perfectly cooked meals every time. The H3XPK-1 also features a convenient removable grease tray for easy cleanup, along with a built-in thermometer for precise temperature monitoring. One of the standout features is its high-performance ignition system, which guarantees reliable starts every time.

Similarly, the H4X-1 model offers enhanced grilling capabilities with its larger cooking surface and dual burners. This model is designed for those who love to entertain, providing ample space to cook multiple dishes simultaneously. The heavy-duty grates retain heat well, delivering those sought-after grill marks. Additionally, the H4X-1 includes a side burner for an extra cooking area, making it a versatile addition to any outdoor kitchen.

The P3XFN-1 and P3XN-1 models are particularly suited for those who appreciate portable grilling. The P3XFN-1 is lightweight yet powerful, making it ideal for camping and tailgating. It includes foldable legs, which enhance its portability without compromising on cooking performance. Meanwhile, the P3XN-1 features a compact design that still allows for significant cooking space, perfect for smaller outdoor areas.

Finally, the H4XN-1 combines the best features of its predecessors and adds advanced technology. With its digital control panel, users can easily monitor and adjust the temperature, making precision grilling attainable. The H4XN-1 also comes equipped with integrated LED lighting, allowing for nighttime grilling without hassle.

In summary, each Broilmaster model—from the sturdy H3XPK-1 and H4X-1 to the portable P3XFN-1 and P3XN-1, and finally the tech-savvy H4XN-1—integrates quality, durability, and innovation. Whether for backyard gatherings or on-the-go grilling, these models cater to diverse preferences, ensuring unforgettable outdoor cooking experiences.