Enclosure Requirements

BBA TANK CADDY INSTALLATION

Lower the BBA Door Assembly onto the two hinge pins inside the lower left and right sides of the BBA Frame. FIGURE 4 .

HINGE

FIGURE 4

The enclosure design must be constructed to allow only storage of the LP cylinder in use thus preventing storage of a second cylinder. Tank caddy must be provided for use in the enclosure when employing the propane self-contained system so as to prevent the lateral movement of the propane tank cylinder from its enclosure.

An enclosure for a LP gas cylinder shall be ventilated by openings at the level of the cylinder valve and at floor level. The effectiveness of openings(s) for purposes of ventilation shall be determined with the LP gas supply cylinder in place. This shall be accompanied by one of the following: enclosure with one side completely open; or enclosure having four sides, a top and a bottom. Refer to the Built-In Kit enclosure construction guide for proper dimensions of the opening for the BBA-1 Tank Caddy.

1.At least two ventilation openings at cylinder valve level shall be provided in the side wall, equally sized, spaced at 180 degrees (3.14 rad), and unobstructed. Each opening shall have a total free area of not less than 1/2 square inch per pound (7.1 cm2/kg) of stored fuel capacity and not

less than a total free area of 10 square inches (64.5 cm2).

2.Ventilation opening(s) shall be provided at floor level and shall have a total free area of not less than 1/2 square inch per pound (7.1 cm2/kg) of stored fuel capacity and not less than a total free area of 10 square inches (64.5 cm2). If ventilation openings at floor level are in a side wall, there shall be at least two openings. The bottom of the openings shall be at floor level and the upper edge no more than 5 inches (127 mm) above the floor. The openings shall be equally sized, spaced at 180 degrees (3.14 rad) and unobstructed.

3.Every opening shall have minimum dimensions so as to permit the entrance of an 1/8 inch (3.2 mm) diameter rod.

The cylinder valve shall be readily accessible for hand operation. A door on the enclosure to gain access to the cylinder valves is acceptable, provided it is non- locking and can be opened without the use of tools.

The enclosure for the LP gas cylinder shall isolate the cylinder from the burner compartment to provide shielding from radiation, a flame barrier, and protection from foreign material, such as hot drippings.

There shall be a minimum clearance of 2 inches (50.8 mm) between the floor of the LP gas cylinder enclosure and the ground.

The design of the outdoor cooking gas appliance shall be such that the LP gas cylinder can be connected, disconnected and the connections inspected and tested outside the cylinder enclosure; and those connections which could be disturbed when installing the cylinder in the enclosure can be leak tested inside the enclosure.

Page 14

B101502-1-0311

BHAX-1, BSA-1, BBA-1, BHA-1, BDA-1 specifications

Broilmaster has long been synonymous with high-quality outdoor cooking solutions, and their lineup of gas grills including the BRB-1, BDA-1, BHA-1, BBA-1, and BSA-1 models showcases this reputation. Each of these grills is designed to bring the backyard cooking experience to new heights, equipped with features and technologies that meet the demands of grill enthusiasts.

The BRB-1 is a robust and versatile grill that offers exceptional durability due to its use of premium materials. One of its standout features is the stainless steel burners, which deliver consistent, high heat for optimal cooking. The BRB-1 also incorporates a unique cooking system, allowing for even heat distribution, reducing cold spots and increasing the efficiency of cooking. Additionally, this model features a convenient side shelf, providing ample workspace for food preparation.

The BDA-1 model is characterized by its innovative dual cooking system. This grill allows users to cook different foods at various temperatures simultaneously, making it perfect for entertaining. The BDA-1 also includes an easy-to-clean grease management system, which simplifies maintenance and enhances food safety by reducing flare-ups.

The BHA-1 is ideal for those who value both functionality and aesthetic appeal. Featuring a sleek design, this grill includes a built-in thermometer for precise temperature control during cooking. The BHA-1 leverages infrared cooking technology, which seals in juices and flavors while providing high heat for searing meats perfectly. This model also boasts a spacious cooking surface, accommodating larger meals, making it suitable for family gatherings.

The BBA-1 offers further versatility with multiple cooking options, including grilling, smoking, and roasting. This grill is equipped with an automatic ignition system that ensures easy startup every time. The BBA-1 also supports a range of accessories, allowing users to customize their grilling experience according to personal preferences.

Finally, the BSA-1 stands out with its efficiency and user-friendly features. Designed for easy assembly and maintenance, this model includes tool hooks and an integrated storage cabinet to keep grilling essentials organized. The BSA-1 integrates high-grade materials that withstand the elements while providing stylish outdoor decor.

In summary, Broilmaster’s BRB-1, BDA-1, BHA-1, BBA-1, and BSA-1 models each offer unique features tailored to different grilling styles and preferences. From durability and temperature control to versatile cooking systems, these grills aim to elevate the outdoor cooking experience for enthusiasts of all levels.