Broilmaster SSPB26-1 owner manual Lp Gas

Page 7

PATIO BASE ASSEMBLY

4

Fasten the four 1/4-20 x 1 3/4" eyebolts (4) to the top of the square post using 1/4 - 20 x 3/4" bolts, 9/32 ID x 5/8 OD flat washers, 1/4 lock washers, and 1/4-20 hex nuts.

Position the grill head onto the eyebolts and fasten with 1/4 lock washers and 1/4-20 Hex nuts. FIGURE 3.

Figure 3

5

Arrange with your local gas company or licensed con- tractor to have a gas supply line connected to the inlet of the stainless steel flex tube assembly. The gas supply must have a shutoff valve inside the wall and must be shutoff when the grill is not in use.

Use pipe thread sealant or Teflon tape at the threads of each connection being careful to not allow any of these materials into the flare seat. Test for gas leaks as directed by the grill’s Owners Manual.

The grill and its individual shutoff valves must be dis- connected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 PSIG.The grill must be isolated from the gas supply piping system by closing its individual manual shutoff valves during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 PSIG.

WARNING: DO NOT SUPPLY LP GAS TO A GRILL DESIGNED FOR NATURAL GAS OR NATURAL GAS TO A GRILL DESIGNED FOR

LP GAS.

Gas leak tests should be completed as directed in the grill owner's manual.

B101075-1-0807

Page 7

Image 7
Contents BPB26-1 and SSPB26-1 Patio Base This GAS Accessory is Designed for Outdoor USE only Table of Contents Important Information Grill LocationBPB26 SSPB26 Patio Base Parts List & Exploded ViewPatio Base Assembly LP GAS Broilmaster