PATIO BASE ASSEMBLY
6
Attach the grease cup bracket assembly (10) to the bottom of the grill casting and fasten with
Loosen the wing nut and move the slide up or down to accept the grease cup. Be sure to trap the rim of the cup as shown.
Use only the supplied grease cup or noncombustible containers for the grease cup (aluminum or tin cans). DO NOT use combustible containers such as Styrofoam or paper cups.
7
Attach the control housing (6) using two #8 x 1/2" Phillips Truss screws or two plastic panel fasteners as shown in Figure 5.
8
Continue assembly as directed by the Owner’s Manual packaged with the grill head.
Figure 4
Figure 5
BROILMASTER®
is a registered trademark of
Empire Comfort Systems, Inc.
918 Freeburg Ave.
Belleville, Illinois 62220 Phone:
Page 8 | VISIT OUR WEB SITE AT WWW.broilmaster.com |