3Com X3 owner manual 5X + 1X Hold, Turn On the Ignition

Alarm Feature Programming (continued)

Press	LED Flash/	Press TX Button	Press TX Button		Press TX Button		Press TX Button
Valet		One Chirp
	Chirp		Two Chirps			Three Chirps
Switch
		(Default Setting)
1	1	Chirps “On”	Chirps “Off”
2	2	Manual Arming	Automatic Arming		Automatic Arming
			without Door Locking		with Door Locks
3	3	Ignition On/Off with	Ignition On/Off without
		Door Lock/Unlock	Door Lock/Unlock
4	4	Auto Rearm “Off”	Auto Rearm “On”
5	5	.8 Sec Door Lock/	3.5 Sec Door Lock/		.8 Sec Double
		Unlock Output	Unlock Output		Unlock Output
6	6	Car-Jacking “Off”	Manual Car-Jack “On”		Automatic Car-Jack “On”
7	7	HC4 Red/White Wire	HC4 Red/White Wire		HC4 Red/White Wire
		(-) Channel 3 Output	(-) Domelight Output		(-) 2nd Unlock Output
8	8	Trunk Release	Trunk Release
		Disarm On	Disarm Off
		Alarm/Keyless	Keyless Entry
9	9		Only Mode
		Entry Mode
			(No Alarm Functions)
			(No Carjacking Functions)
10	10	HC4 Brown Wire	HC4 Brown Wire		HC4 Brown Wire
		Siren Output	Pulsed Siren Output		Horn Output
11	11	Instant Door	Door Ajar Warning
		Ajar Warning	with 45 Second Delay
12	12	Standard Horn	“SOS” Type			S-L-S-L	4-chirp S-S-S-L
		Pulse Output	S-S-S - L-L-L - S-S-S				5-chirp S-M-L-S-M-L
							6-chirp SS - L - S-S
				Turn On the Ignition
	Step 4: Exit Program Mode
				3 long chirps will confirm exit of the programming
				mode.
				Note: Waiting 15 seconds after the last command will
				also cause the system to automatically exit the
				programming mode.
Shock Sensor Testing and Adjustment
	Step 1		Step 2				Step 3

3X

5X + 1X (Hold)

Turn the ignition switch from the OFF position to the ON position 3 times leaving it in the Off position the third time.

8

Before 15 seconds has passed, push and release the valet switch 6 times. Hold the button down on the 6th press until 3 short chirp/beeps and 1 long chirp/beep is heard then release it.

Press and release the ( ) button for 2 seconds. You will hear

1 long siren/horn chirp. You are now in the “Primary Trigger Shock Sensor Test mode”.