3Com X3 Shock Sensor Testing and Adjustment, Transmitter Operation Alarm Status Indicators

Page 9

Shock Sensor Testing and Adjustment

Step 4

 

Step 5

 

Step 6

IncreaseDecrease

1.Press the LOCK button to increase sensitivity by 1 step (1 chirp)

2.Press the UNLOCK button to decrease the sensitivity by 1 step (1 chirp)

3.Rap on the vehicle body panels and glass to achieve the proper setting.

Note: If you hear 2 chirps while making an adjustment, you have reached the max setting.

1.Press and hold the LOCK and UNLOCK buttons together for 2 seconds. You will hear 2 long siren/horn chirp. You are now in the “Pre-warning” trigger Shock Sensor test mode.

2.Follow the procedures in Step 4 to adjust the “Pre-warning”sensitivity.

To exit the shock sensor test mode, turn ignition “On” and 3 long chirps will confirm exit of the “Shock Sensor” test mode.

Note: 30 seconds of inactivity will force exit of the shock sensor test mode.

Owners Manual

A. Transmitter Operation

B. Alarm Status Indicators

LED Indications

LED is off = Alarm is disarmed.

LED is flashing normal = Alarm is armed.

Lock/ Arm

Un-Lock/ Disarm

LED is flashing fast = Automatic Arming Countdown. LED is on (solid) = Valet Mode.

LED flashes twice then pauses = Tamper warning, alarm was triggered by an

Car-Finder

2nd System

CH#3

(Trunk)Panic

open trunk or hood.

LED flashes three times then pauses = Tamper warning, alarm was triggered by an open door.

LED flashes four times then pauses = Tamper warning, alarm was triggered by the shock sensor.

LED flashes five times then pauses = Tamper warning, alarm was triggered by voltage from the ignition switch turning on.

Chirp Indications

One siren chirp = Security system is armed. Two siren chirps = Security is disarmed.

Four chirps = Tamper disarm warning, alarm was previously triggered. Two sets of two chirps = Stage 1 of progressive car finder

Two sets of three chirps = Stage 2 of progressive car finder Six chirps = Stage 3 of progressive car finder

Parking Light Indications

Parking lights flash one time upon arming = Security system is armed. Parking lights flash two times upon disarming = Security system is disarmed. Parking lights flash three times upon disarming = Tamper disarm warning, alarm was previously triggered.

Parking lights flash three times while armed = Stage 1 and 2 of progressive car finder

Parking lights flash six times while armed = Stage 3 of progressive car finder

9

Image 9
Contents For Technical Assistance, please call 800 Installation Owner’s ManualComponent Installation Table of ContentsWiring HC4 White 12-Pin Main HarnessViolet Wire + Common Door Pin Input Wiring Harness Quick ReferenceOrange Wire Ground when Armed Output HC4 12-Pin Main HarnessBrown Wire Siren Output Black Wire Chassis GroundWhite/Red Wire +/- Parking Light Relay Input Red Wire +12VDC Battery InputHC3 Black 3-Pin Door Lock Harness Optional Wiring DiagramsProgramming the Transmitter Brown Wire When programmed for Horn Output3X3X Alarm Feature ProgrammingTurn On the Ignition 5X + 1X HoldTransmitter Operation Alarm Status Indicators Shock Sensor Testing and AdjustmentDual-Zone Shock Sensor Manual Arming LockAutomatic Arming Enter Valet Mode Valet ModeExit Valet Mode Manual Disarming UnlockAnti Car-Jacking Manual Activation Anti Car-Jacking Automatic ActivationOverride the System to Turn Off Car-Jacking