[WPE | 039] | E20101 | BBQ Manual E | 12/22/04 | 2:05 AM | Page | 9 |
1
1.Assemble two wheels (DG) to the bottom of right cart leg (DD) in configuration as shown.
2.Then attach to the bottom shelf (DF) by using bolts (x2), washers (x2), and 1/4” nuts (x2).
3.Attach two end caps (DE) to the left cart leg (DC) by using 1/4 x 1 3/8” screws (x2) and 1/4” nuts (x2).
4.Assemble front brace (DN) to attach both cart legs by using 1/4 x 1/2” screws (x4).
2
1.Assemble the front panel (DA) to the L/R cart leg by using 1/4 x 2 3/8” screws (x6) and 1/4” nuts (x6).
2.Assemble the rear brace (DK) to both cart legs by using 1/4 x 2 3/8” screws (x4) and 1/4” nuts (x4). At the same time, assemble the burner box braces (DB) to the rear brace and both cart legs by using above same screws and nuts.
3
1.Assemble the firebox hinges (BB) to the burner box weldment (BA) by using 1/4 x 1/2” screws (x4) and 1/4” nuts (x4).
2.Assemble the whole burner box assembly onto two braces of burner box (DB) by using 1/4 x 1/2” screws (x4) , Ø7 flat washers (x4), fiber washers (x4), and
1/4” nuts (x4) which should be assembled under the two braces of burner box.
9