Master Chef E20101, WPE 039, 85-1027-0 Assemble the heat reflector assembly be onto the burner box

[WPE 039] E20101 BBQ Manual E 12/22/04 2:05 AM Page 10

4

1.Assemble the heat reflector assembly (BE) onto the burner box.

2.Assemble the heat element assembly (BD) to the right side of burner box as shown by using No.10 x 3/8” screws (x2) and No.10 nuts (x2). After finishing this step, properly insert the whole assembly on to the heat reflector.

3.Then put the cooking grate onto the burner box which should be above all components in previous two points.

5

1.Assemble the top lid assembly (A) to the burner box assembly by connecting the upper and lower hinges with 1/4 x 1 3/8” screws (x2) and 1/4” nuts (x2) to connect the upper and fire box hinges together.

2.Assemble the thermometer assembly (AG) into the hole which is on the top lid by using attached wing nut.

10

6

Attach the shelf mount-1 (CA) and shelf mount-2 (CB) inside the side shelf panel (CC) by using ST 4.2 x 10 self tapped screw and plastic bushing. Same process for the other side shelf assembly.