Smeg SGR30 manual Installation, Installing the Barbecue

Page 6

INSTALLATION

TECHNICAL DATA FOR INSTALLERS

Installation and maintenance listed in this section must only be carried out by qualified personnel (law n° 46 and D.P.R. 447).

A faulty installation can cause damage to persons, animals or objects, towards whom the manufacturer cannot be held responsible.

The cut-off or automatic control devices of the appliance can only be modified by the manufacturer or by a duly authorized supplier.

An opening in the table top of the piece of modular furniture must be made with the dimensions indicated in fig. 2, making sure that the dimensions of the space required to install the appliance are observed.

This is a Class 3 appliance and is therefore subject to all the requirements set by the standards for these appliances.

3) INSTALLING THE BARBECUE

Take the barbecue out of its packaging, unpack the various loose parts, then make sure it is not damaged. In case of doubt do not use the appliance and contact a qualified technician.

Packaging (cardboard, bags, expanded polystyrene, nails...) must not be left within children's reach as they are potential sources of danger.

FIG. 2

FIG. 3

18

Image 6
Contents Tipo PFZ MOD. SGR30 Barbecue Description Type BD30Switching on the Barbecue USEUSE Cleaning Cooking SurfaceInstallation Installing the BarbecueSecuring the Barbecue When connection is made directly to the power circuit Electrical ConnectionsTechnical Specifications of Electrical Components MaintenancePart Replacement Type and Section of Power CablesTechnical Specifications BarbecueTechnical Assistance and Spare Parts