Cleaning and care
,Under no circumstances use a steam cleaner to clean this appliance. Pressurized steam could cause permanent damage to the surface and to components for which the manufacturer cannot accept responsibility.
Never use strong cleaners e.g. oven sprays, stain or rust removers. Scouring pads and abrasive cleaning agents should only be used on the heating element.
Do not use any sharp pointed objects which could damage the seal between the ceramic surface and the surrounding frame, and between the frame and the countertop.
When using cleaning agents for stainless steel always follow the manufacturer’s instructions on the packaging.
After cleaning use a soft, dry cloth to remove any moisture. This way you will prevent the build up of limescale deposits.
Stainless steel
Clean stainless steel surfaces with warm water and liquid dish soap applied with a
Stainless steel surfaces can be cleaned using a
To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure.
Do not use stainless steel cleaner on or around the printing, it may rub off. Use only a soft sponge with some dish liquid and warm water to clean this area.
Grates and lava rock container
After each use, clean the grates and lava rock container with warm water and liquid dish soap.
Do not use stainless steel conditioner on the lava rock container.
Heating element
Grill residue can best be removed from the heating element using a scouring pad.
13