Char-Broil 8601559 Grill Cart Assembly, Same manner, using 2 1/4-20 screws, Part Qty Fasteners

4 ASSEMBLY GUIDE					GRILL CART Assembly
		Part	Qty			Fasteners
		A1– Cart Base	1	.
		A2– Front Leg Set	1
		A3– Rear Leg Set	1
		A4– Wheels	2		1/4x20-1/2"	Wheel Retaining	3/8-16 Nut
		A5– Hubcap	2
					screw	Clip	(qty 2)
					(qty 4)	(qty 2)
Step 1– Attach Front Leg Set (A2) to the Cart Base
	(A1) using 2 1/4-20 screws. Attach Rear					Axle Bolt
	Leg Set (A3) to the Cart Base (A2) in the
	same manner, using 2 1/4-20 screws.					(qty 2)
						After cart assembly, if
						your cart does not sit
						level, use these screws to
						adjust the cart.
							A3

Step 2– Attach 2 Axle Bolts to the Rear Leg A2

Set (A3), thread a 3/8-16 nut as shown and tighten securely using a small adjustable wrench.

Slide a Wheel (A4) over an Axle Bolt

and secure using a Wheel Retaining

Clip. Repeat for other side.

Position and Snap into place the Wheel Hubcaps (A5).

A1

1/4-20 Screws

(4 each)

Wheel Retaining Clip - Install after placing wheel on the axle.

	Axle Bolt
Axle Nut	A5
3/8-16

Position wheel as shown

A4

Visit www.sizzleonthegrill.com/user-forumsto chat with Patio Bistro® owners just like you!