Weber FT 600 Main Burner Flame Pattern, MCAUTION Do not enlarge the burner ports when cleaning

Page 39

Main Burner Flame Pattern

The Weber Gas Barbecue burners have been factory set for the correct air and gas mixture. The correct flame pattern is shown in Figure 13.

Tips occasionally yellowish

Burner inside cooking box

Light blue

Dark blue

Flames

Figure 13

If the flames do not appear to be uniform the length of the burner tube, follow the burner cleaning procedures.

Main Burner Cleaning Procedure

Turn off the gas supply. Remove the manifold. (See Section “Replacing the main burners”.)

Look inside each burner with a flashlight. Figure 14.

Figure 14

Clean the inside of the burners with a wire

(a straightened out coat hanger will work). Figure 15. Check and clean the air shutter opening at the ends of the burners. Check and clean the valve orifices at the base of the valves. Use a brass bristle brush to clean outside of burners. This is to make sure all the burner ports are fully open.

Figure 15

mCAUTION: Do not enlarge the burner ports when cleaning.

Replacing the Burners

1.Your Weber Gas Barbecue must be OFF and cool.

2.Turn OFF gas at source.

3.Disconnect regulator.

4.To remove control panel refer to Step “Remove the control panel and the front panel”.

5.Remove splash guards.

6.Remove cooking grill(s) and griddle.

7.Remove Flavorizer bars.

8.Remove the manifold by unsnapping the clips at the right and left front of the cooking box. Figure 16.

Figure 16

9.Disconnect white and black wire from each igniter. Figure 17.

White wire

Black wire

Figure 17

39

Image 39
Contents LP Gas Barbecue LP GAS Units only Warranty Patents and Trademarks Contents Storage General InstructionsCheck package contents AssemblyBER E W REB Check contents of hardware packs Insert casters Assemble wheel frameContinue frame assembly Assemble front top frame rail Install match holder bracketBack Assemble back top frame railBolt front top frame rail assembly Bolt back panel and back top frame rail assembly Add fuel scale Add tank panelAdd cooking box assembly Remove the control panel and the front panel Set LP fuel scale Check burner alignmentCheck that burners are off Fill LP tankConnect LP tank Check for gas leaks Install Flavorizer Bar/cooking grill support Install Flavorizer BarsRear Front Install splash guards Install Cooking Grills and Griddle Install left work surface and glides Install right work surface and glidesPounds Push on the burner control knobs. Figure View from front of the Cooking Box Install bottom trayAdd accessory rack Lighting To ExtinguishHigh Medium Low Off Manual Lighting Using the Cooking Grates Using the Cast Iron GriddleCooking Periodic Cleaning Storage and/or NonuseTubes. do not Enlarge Burner Ports Removal of the LP tank Refilling the LP tankMale fitting Regulator Collar Quick disconnect engaged Liquid Propane LP Tanks Safe handling tips for LP GasAnnual Maintenance MWARNING Do not ignite burners while leak checking General MaintenanceMain Burner Flame Pattern MCAUTION Do not enlarge the burner ports when cleaningPull the manifold out of the burners. Figure Crossover Ignition System Operations Burner does not light, or flame is low in High position TroubleshootingPage 30 31 32 Parts List Page Page Final Word of Thanks

FT 600 specifications

The Weber FT 600 is an innovative and cutting-edge grilling machine designed for both amateur and professional grill enthusiasts. It combines high-performance features with advanced technologies, making it a preferred choice for those who pursue the ultimate grilling experience.

One of the standout features of the Weber FT 600 is its superior heating system. Equipped with a powerful gas burner, this grill reaches high temperatures quickly, promoting efficient cooking. The infrared technology ensures even heat distribution across the grilling surface, allowing for perfectly cooked meats, vegetables, and other grilling delights.

The grill's cooking surface is expansive, providing ample room for grilling multiple items simultaneously. It boasts a durable, easy-to-clean surface made of high-quality stainless steel, which not only enhances heat retention but also adds a sophisticated aesthetic to any outdoor kitchen setup.

Another key technology featured in the Weber FT 600 is the integrated temperature control system. This system allows users to monitor and adjust the temperature with precision, ensuring that different types of food cook optimally. The built-in thermometer provides real-time readings, taking the guesswork out of grilling.

The Weber FT 600 also emphasizes user convenience. It includes features such as a large, detachable grease tray that simplifies cleanup and a side burner for preparing sauces or side dishes while grilling. The grill's sturdy construction and weather-resistant materials ensure longevity, allowing users to enjoy countless barbecues season after season.

For enhanced versatility, Weber has integrated a range of accessories into the FT 600. From rotisserie kits to grill tools, these accessories are designed to elevate the grilling experience further. The grill can be customized to accommodate diverse cooking styles, whether smoking, roasting, or searing.

Finally, safety is a top priority in the design of the Weber FT 600. With features such as a secure lid latch and even-temperature distribution, users can cook with peace of mind.

In conclusion, the Weber FT 600 embodies the perfect blend of technology, performance, and convenience. Its robust features and user-centric design make it an exceptional choice for anyone looking to elevate their outdoor cooking experience. With this grill, delicious and evenly cooked meals are always just a flame away.