Weber FT 600 owner manual Crossover Ignition System Operations

Page 41

13.Lift and twist the burner assembly slightly to separate the crossover tube from the burners. Remove the burners from the cooking box. Figure 21.

Separate here

Crossover tube

Figure 21

14. To reinstall the burners, reverse steps 3 through 13.

mCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 22a.

Check proper assembly before fastening manifold in place. Figure 22b.

(a)

Valve

Burner

(b)

Figure 22

15.Reinstall the Spider Stopper Guards. Slightly rotate the Spider Stopper Guards so that the seams are in line with the Venturi fins. There should be no gaps in the seams or in the fit around the burners and valves. Figure 23.

Check fit around valve

Venturi fin

Check fit around burner

Figure 23

mCAUTION: If the Spider Stopper Guards do not fit tightly, contact Weber-Stephen Customer Service.

mCAUTION: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the barbecue. See Step“Check for gas leaks”.

Crossover Ignition System Operations

If the Crossover Ignition System fails to ignite the Front burner, light the Front burner with a match. If the Front burner lights with a match, then check the Crossover Ignition System.

■Check that both the white and black ignition wires are attached properly. Figure 24.

Figure 24

■Check that the Crossover Ignition button pushes the igniter (button) down, and returns to the up position.

■Check to see if the igniter is loose in the frame. Tighten if necessary; see Step “Install igniter” for correct procedure.

If the Crossover Ignition System still fails to light, contact your dealer.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents LP Gas Barbecue LP GAS Units only Warranty Patents and Trademarks Contents Storage General InstructionsCheck package contents AssemblyBER E W REB Check contents of hardware packs Insert casters Assemble wheel frameContinue frame assembly Assemble front top frame rail Install match holder bracketBack Assemble back top frame railBolt front top frame rail assembly Bolt back panel and back top frame rail assembly Add fuel scale Add tank panelAdd cooking box assembly Remove the control panel and the front panel Set LP fuel scale Check burner alignmentCheck that burners are off Fill LP tankConnect LP tank Check for gas leaks Rear Front Install Flavorizer Bar/cooking grill supportInstall Flavorizer Bars Install splash guards Install Cooking Grills and Griddle Pounds Install left work surface and glidesInstall right work surface and glides Push on the burner control knobs. Figure View from front of the Cooking Box Install bottom trayAdd accessory rack High Medium Low Off LightingTo Extinguish Manual Lighting Cooking Using the Cooking GratesUsing the Cast Iron Griddle Tubes. do not Enlarge Burner Ports Periodic CleaningStorage and/or Nonuse Removal of the LP tank Refilling the LP tankMale fitting Regulator Collar Quick disconnect engaged Liquid Propane LP Tanks Safe handling tips for LP GasAnnual Maintenance MWARNING Do not ignite burners while leak checking General MaintenanceMain Burner Flame Pattern MCAUTION Do not enlarge the burner ports when cleaningPull the manifold out of the burners. Figure Crossover Ignition System Operations Burner does not light, or flame is low in High position TroubleshootingPage 30 31 32 Parts List Page Page Final Word of Thanks

FT 600 specifications

The Weber FT 600 is an innovative and cutting-edge grilling machine designed for both amateur and professional grill enthusiasts. It combines high-performance features with advanced technologies, making it a preferred choice for those who pursue the ultimate grilling experience.

One of the standout features of the Weber FT 600 is its superior heating system. Equipped with a powerful gas burner, this grill reaches high temperatures quickly, promoting efficient cooking. The infrared technology ensures even heat distribution across the grilling surface, allowing for perfectly cooked meats, vegetables, and other grilling delights.

The grill's cooking surface is expansive, providing ample room for grilling multiple items simultaneously. It boasts a durable, easy-to-clean surface made of high-quality stainless steel, which not only enhances heat retention but also adds a sophisticated aesthetic to any outdoor kitchen setup.

Another key technology featured in the Weber FT 600 is the integrated temperature control system. This system allows users to monitor and adjust the temperature with precision, ensuring that different types of food cook optimally. The built-in thermometer provides real-time readings, taking the guesswork out of grilling.

The Weber FT 600 also emphasizes user convenience. It includes features such as a large, detachable grease tray that simplifies cleanup and a side burner for preparing sauces or side dishes while grilling. The grill's sturdy construction and weather-resistant materials ensure longevity, allowing users to enjoy countless barbecues season after season.

For enhanced versatility, Weber has integrated a range of accessories into the FT 600. From rotisserie kits to grill tools, these accessories are designed to elevate the grilling experience further. The grill can be customized to accommodate diverse cooking styles, whether smoking, roasting, or searing.

Finally, safety is a top priority in the design of the Weber FT 600. With features such as a secure lid latch and even-temperature distribution, users can cook with peace of mind.

In conclusion, the Weber FT 600 embodies the perfect blend of technology, performance, and convenience. Its robust features and user-centric design make it an exceptional choice for anyone looking to elevate their outdoor cooking experience. With this grill, delicious and evenly cooked meals are always just a flame away.
Top Page Image Contents