Weber Silver C manual Lighting the Side Burner, Lighting only the side burner

Page 26

Lighting the Side Burner

The side burner has a separate ignition system from the main cooking box.

DANGER

Failure to open the lid while igniting the side burner, or not waiting 5 minutes to allow the gas to clear if the side burner does not light, may result in an explosive flame-up which can cause serious bodily injury or death.

Lighting only the side burner.

1)Open the side burner lid.

2)Check that the side burner valve is turned OFF. (Push each knob down and turn clockwise to ensure they are in the off position.), and all main burner control valves are OFF (push down and turn clockwise).

3)Turn the LP tank valve on (turn counter-clockwise).

4)Push down and turn the side burner control valve to HI.

5)Push the side burner igniter button several times so it clicks each time.

CAUTION: Side burner flame may be difficult to see on a bright sunny day.

1

2, 4

5

WARNING: If the side burner does not light:

1)Turn OFF the side burner control valve.

2)Wait 5 minutes to let the gas clear before you try again or try to light with a match.

Lighting the side burner if the main burners are lit.

1)Open the side burner lid.

2)Push down and turn the side burner control to HI.

3)Press the side burner igniter button several times so it clicks each time.

CAUTION: Side burner flame may be difficult to see on a bright sunny day.

1

2

3

WARNING: If the side burner does not light:

1)Turn OFF the side burner control valve.

2)Wait 5 minutes to let the gas clear before you try again or try to light with a match.

D-3

Image 26

Contents Owners Guide Liquid Propane GAS Units only Warranty Customer Service Center Roselle Road, Suite Schaumburg, ILContents Operating For Installation in CanadaStorage Genesis Silver-C LP Manifold, Hose and regulator assembled Page Page Page Assemble wheel frame Assemble frameAdd front panel Continue frame assemblyComplete frame assembly Add back panelAdd cooking box assembly Insert castersFrame brace2 Install manifold bracketsInstall cylinder panel Add fuel gaugeCheck that all burner valves are off Install igniterInstall the slide out bottom tray Install Lid Installing Features Do not use the work surface as a cutting board Install the work surface Install side burnerInstalling the warming rack Installing the Warm-Up BasketInstall the thermometer Install the bottom shelfChecking the fuel level in your tank Fill liquid propane cylinderTo Connect the hose to the cylinder Check for gas leaks Lighting To ExtinguishManual Lighting Lighting the Side Burner Lighting only the side burnerStorage and/or Nonuse CleaningCooking Important LP Cylinder Information Refilling the Liquid Propane CylinderRemoval of the LP cylinder Liquid Propane Cylinder Liquid Propane LP Cylinders Safe handling tips for Liquid Propane Gas CylindersFor Canada Only Liquid Propane Cylinder requirementsAnnual Maintenance CheckWeber Spider /Insect screens General MaintenanceMain Burner Cleaning Procedure Main Burner Flame PatternReplacing Main Burners Crossover Ignition System Operations Burners burn with a yellow or Barbecue temperature onlyFlame is low when burner is on Orange flame, in conjunction withFlame is very yellow Side Burner does not lightFlame is low in High position Conjunction with the smell of gasSee Section a See Section B Install manifold bracketWeber Spider Stopper Guards See Section D