Weber QCC1, Hose and Regulator Replacement If you have a more recent model, follow steps below

Page 10

Case 2

If you have a more recent model, follow steps below.

Step 2 (Case 2)

Remove burner control knobs and control panel.

Remove burner control knobs (1) by pulling control knobs straight up off the valve stem.

Remove screws through slots in trim with a Phillips screwdriver (2) and lift control panel off frame (3).

(1)

(2)

(3)

*The grill illustrated my have slight differences than the model purchased.

Image 10

Contents QCC1 Hose and Regulator Replacement POL regulator Disconnect hose and regulator assembly from LP tank StepCase Remove burner control knobs and control panelRemove hose and regulator assembly from manifold Attach new QCC1 hose and regulator assembly to manifold FlameCheck Safety System Connect the QCC1 hose and regulator assembly to LP tank Check for gas leaks FlameCheck safety system If you have a more recent model, follow steps below Remove hose and regulator assembly from manifold Connection requires tightening by hand only Check for gas leaks Page Reinstall control panel and burner control knobs Regulador POL Paso Si tiene un regulador POLCaso Paso 2 CasoPaso 3 Caso Retire del múltiple al ensamblaje de la manguera y reguladorPaso 4 Caso Sistema de seguridad FlameCheckPaso 5 Caso Paso 6 Caso Compruebe que no existan fugas de gasSistema de seguridad FlameCheck Caso Paso 3 Caso Paso 5 Caso Compruebe de que no haya fugas de gas Page Siga el Paso 2 en reverso En convertissant votre barbecue avec Étape Si vous possédez un régulateur POLCas Étape 2 casÉtape 3 cas Retirez le boyau et le régulateur du collecteurÉtape 4 cas Dispositif de sécurité FlameCheckÉtape 5 cas Étape 6 cas Vérifiez pour voir s’il n’y a pas de fuites de gazDispositif de sécurité FlameCheck Cas Étape 3 cas Étape 5 cas Étape 6 cas Page Suivez les directives de l’étape 2 à l’envers 55354 04/03