Weber Silver B manual Annual Maintenance, Check

Page 29

Annual Maintenance

After a period of nonuse, we recommend that you perform the following maintenance procedures for your safety.

WARNING: Check the hose before each use of the barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber authorized replacement hose. Contact the Customer Service Representative in your region using the contact information sheet provided with your manual.

Inspect the burners for correct flame pattern. Clean if necessary, following the procedures outlined in the “General Maintenance” section of this manual.

Check all gas fittings for leaks.

DANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. Sparks or flames will result in a fire or explosion, which can cause serious bodily injury or death, and damage to property.

WARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

Note - All factory-made connections have been thoroughly checked for gas leaks. The burners have been flame tested. As a safety precaution however, you should recheck all fittings for leaks before using your Weber Gas Barbecue. Shipping and handling may have loosened or damaged a gas fitting.

WARNING: Perform these leak checks even if your barbecue was dealer- or store-assembled. You will need: a soap and water solution and a rag or brush to apply it.

To perform leak checks: Make sure all Burners are in the off position. Turn on gas supply.

WARNING: Do not ignite burners while leak checking.

Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form, or if a bubble grows, there is a leak.

Note - Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks.

Check:

1) Hose-to-manifold connection.

WARNING: If there is a leak at the hose-to- manifold connection(1), retighten the hose fitting with a wrench and recheck for leaks with soap and water solution.

If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE BARBECUE.

Contact the Customer Service Representative in your region using the contact information sheet provided with your manual.

2)Valves-to-manifold connections.

3)The hose-to quick-disconnect connection.

WARNING: If there is a leak at connections (2) or

(3), turn OFF the gas. DO NOT OPERATE THE BARBECUE. Contact the Customer Service Representative in your region using the contact information sheet provided with your manual. When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(1)

(2)

(3)

*The grill illustrated may have slight differences than the model purchased.

Inspection and cleaning of the Spider/Insect screens

To inspect the spider/insect screens, remove the control panel. If there is dust or dirt on the screens, remove the burners for cleaning the screens. Refer to Maintenance, Replacing Main Burners. Brush the spider/inspect screens, lightly, with a soft bristle brush (i.e. an old toothbrush).

Caution: Do not clean the spider/insect screens with hard or sharp tools. Do not dislodge the spider/insect screens or enlarge the screen openings.

Lightly tap the burner to get debris and dirt out of the burner tube. Once the spider/insect screens and burners are clean replace the burners.

If the spider/insect screen becomes damaged or cannot be cleaned, call Weber-Stephen Products Customer Service for replacement parts.

D-4

Image 29
Contents Owners Guide Liquid Propane GAS Units only Customer Service Center Roselle Road, Suite Schaumburg, IL WarrantyContents General Instructions Genesis Silver-B NG Page Page Page Page See Section D See Section B Install manifold bracketSee Section a Page Assemble frame Assemble wheel frameComplete frame assembly Continue frame assemblyAdd Wrap-around Frame Panel Insert castersAdd cooking box assembly Install igniter Install manifold bracketsTest Connections Install Gas Supply General Specifications for PipingGas Line Piping Connect flexible hose to manifold Check that all burner valves are offCheck for gas leaks Install the slide out bottom tray Install Lid Installing Features Do not use the work surface as a cutting board You will need work surfaceInstall the thermometer Installing the warming rackInstalling the Warm-Up Basket Install the bottom shelfLighting Manual Lighting Cooking Check Annual MaintenanceWeber Spider /Insect screens Replacing Main Burners Crossover Ignition System Operations Burners burn with a yellow or Flame is low when burner is onOrange flame, in conjunction with Smell of gasAustria SLOVAKIA, Czech REPUBLIC, Hungary Sweden Product Registration Mail Reply Business

Silver B specifications

The Weber Silver B grill is a popular choice among outdoor cooking enthusiasts for its perfect blend of functionality, durability, and advanced grilling technologies. It is designed for those who seek a high-quality grilling experience without compromising on convenience and performance.

One of the standout features of the Weber Silver B is its dual burners. The grill is equipped with two stainless steel burners that offer evenly distributed heat across the cooking surface. This allows for excellent temperature control, ensuring that food is cooked to perfection and provides the versatility to create both direct and indirect grilling zones. With a total cooking area of approximately 450 square inches, it can accommodate multiple food items simultaneously, making it ideal for family gatherings or barbecues with friends.

In terms of build quality, the Weber Silver B boasts a sturdy construction thanks to its durable porcelain-enameled cast iron cooking grates that retain heat well while imparting perfect grill marks on meats and vegetables. The lid is also made from high-quality materials with a built-in thermometer, allowing users to monitor the temperature inside while maintaining the proper cooking environment. The accurate temperature monitoring helps ensure that all dishes are cooked evenly and reach the desired doneness.

Another remarkable aspect of the Silver B is its convenience features. The grill features a built-in grease management system that directs excess grease away from the burners and into a removable drip tray, minimizing flare-ups and making clean-up easy. Also, its fold-down side tables provide extra prep space for sauces, tools, and ingredients, enhancing the overall grilling experience.

The Weber Silver B incorporates innovative technologies such as the Flavorizer Bars, designed to catch drippings and vaporize them instantly, which adds a smoky flavor to the food being grilled. This attention to flavor is what sets Weber apart from other grills in its class, ensuring a delicious outcome every time.

In summary, the Weber Silver B is an outstanding grill that combines high-quality construction, advanced grilling technologies, and user-friendly features. Whether you are a seasoned grilling expert or just starting your outdoor cooking journey, the Weber Silver B delivers reliability and performance that meets the needs of any grilling enthusiast. With this grill, outdoor gatherings become memorable events centered around deliciously grilled meals.