Installing Features
Install the right trim piece with tool holders | Install the work surface |
You will need: Right trim piece with tool holders | You will need: work surface. |
Push the Right trim piece into the frame as shown(1), | Place the work surface, so that the front and back |
making sure that the tabs on the underside of the trim | edges fit over the frame, in the area between the left |
piece are snapped into the slots in the frame.(2) | trim piece and the cooking box as shown. |
| Do not use the work surface as a cutting board. |
(1) |
|
(1)
(2)
(1) Make sure that the tabs on the side table are to the right, next to the cooking box.
Install the left end trim piece
You will need: End trim piece, two 1/2 inch bolts, two nylon washers and a wrench
Slide the end trim piece into the frame as shown. Add washer to bolt and put through frame and hole in frame trim piece. Tighten with wrench.
C001.b |