Weber 500 owner manual Assembly, Step, Check package contents

Assembly	Step 1
Tools needed	Check package contents
Hammer
	Cooking box
Phillips screwdriver	(assembly)
7/16 and 3/4 inch open-end or an adjustable wrench

Pliers	Lid
	(assembly)
	®
	®
Block of wood

Supplies needed

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071to receive immediate assistance. Have your owner’s manual and serial number of the barbecue available for reference.

Hose

Bottom tray

Two cooking grates

Control panel

Molded work table

Five Flavorizer Bars

7