Weber 41081 manual Reinstall control panel after checking for gas Leaks

Page 18

Reinstall control panel (after checking for gas

leaks)

(1)Set the control panel in place over both sides of the frame. Hold the crossover ignition button up while setting the control panel in place.

(2)Line up the control panel with the white plastic plugs in the frame brace. Insert screws and tighten with a Phillips screwdriver until snug. Do not overtighten.

(3)Push each of the burner control knobs onto their valve.

(4) Reinstall Side Burner cover.

C-6

Image 18

Contents Genesis PLATINUM-C Liquid Propane GAS Units only Customer Service Center South Hicks RoadPalatine, IL Contents For Installation in Canada StorageOperating Genesis Platinum-C LP Page Page Packaging requires at least two people Page Grease and not allowing grease to flow into Cooking box with finger grip toward you1Num foil. It can cause grease fires by trapping Catch panInstalling the warming rack Installing Smoker BoxInstall the bottom shelf Install Left Work Surface Install Side Burner AssemblyCheck that all burner valves are off Improper Filling is Dangerous Important LP Cylinder Information Hang filled liquid propane cylinder on fuel gaugeConnection. Using a wrench could damage Regulator coupling and could cause a gas leakCheck for gas leaks Reinstall control panel after checking for gas Leaks Lighting To ExtinguishOFF the cylinder and burner control Manual LightingStill flowing to the burners. After turning Knobs, wait at least 5 minutes for the gasLighting the Side Burner Lighting only the side burnerCleaning CookingStorage and/or Nonuse MDANGER Refilling the Liquid Pro Pane CylinderTo Connect the hose to the cylinder Regulator coupling and could cause a leakLiquid Propane Cylinder Inders Safe handling tips forLiquid Propane Gas Cyl Liquid Propane LP CylindersAnnual Maintenance Inspection and Cleaning of the WeberOr explosion, which can cause serious Main Burner Flame Pattern General MaintenanceMain Burner Cleaning Procedure Weber Spider Stopper GuardsReplacing Main Burners Positioned properly over the valve orifices2Crossover Ignition System Operations Burners burn with a yellow or Barbecue temperature onlyFlame is low when burner is on Orange flame, in conjunction withFlame is very yellow Side Burner does not lightFlame is low in High position Conjunction with the smell of gasMWARNING All gas controls and supply valves Should be in the OFF positionTo Clean the Burner Head To Reassemble the Burner Head