Weber 41081 manual General Maintenance, Main Burner Flame Pattern, Weber Spider Stopper Guards

Page 28

General Maintenance

Main Burner Flame Pattern

 

Weber Spider Stopper™ Guards

The Weber Gas Barbecue burners have been factory

set for the correct air and gas mixture. The correct

Your Weber Gas Barbecue, as well as any outdoor gas

flame pattern is shown.

appliance, is a target for spiders and other insects.

1)

Burner tube

They can nest in the venturi section (Venturi(1), air

2)

Tips occasionally flicker yellow

shutter(2), venturi fin(3) ) of the burner tubes. This

3)

Light blue

blocks the normal gas flow, and can cause the gas to

4)

Dark blue

flow back out of the air shutter. This could result in a

 

 

fire in and around the air shutters, under the control

 

 

panel, causing serious damage to your barbecue.

 

(1)

 

 

(1)

 

(2)

 

 

(3)

 

 

(4)

 

 

 

 

 

 

 

 

 

 

 

If the flames do not appear to be uniform throughout

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the burner tube, follow the burner cleaning procedures.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2)

(3)

 

 

 

 

Main Burner Cleaning Procedure

 

The Weber Spider Stopper™ Guard(1) is factory

 

 

 

 

 

 

installed. It fits tightly around the air shutter section of

 

Turn off the gas supply. Remove the manifold.

 

the burner tube and the valve, thereby preventing

 

Look inside each burner with a flashlight.

spiders and other insects access to the burner tubes

 

 

 

 

 

 

 

 

through the air shutter openings.

 

 

 

 

 

 

 

 

 

 

 

 

(1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clean the inside of the burners with a wire (a straight-

 

 

 

 

 

 

ened-out coat hanger will work). Check and clean the

 

 

 

 

air shutter opening at the ends of the burners. Check

 

 

 

 

and clean the valve orifices at the base of the valves.

 

 

We recommend that you inspect the Weber Spider

 

Use a brass bristle brush to clean outside of burners.

 

 

This is to make sure all the burner ports are fully open.

Stopper Guards at least once a year. (See Section

 

 

CAUTION: Do not enlarge the burner ports when

“Annual Maintenance”.) Also inspect and clean the

 

 

cleaning.

Spider Stopper Guards if any of the following

 

 

 

symptoms should ever occur:

 

 

1)The smell of gas in conjunction with the burner flames appearing yellow and lazy.

2)Barbecue does not reach temperature.

3)Barbecue heats unevenly.

4)One or more of the burners do not ignite.

mDANGER

Failure to correct the above mentioned symptoms may result in a fire, which can cause serious bodily injury or death, and cause damage to property.

D-10

Image 28
Contents Genesis PLATINUM-C Liquid Propane GAS Units only South Hicks Road Customer Service CenterPalatine, IL Contents Storage For Installation in CanadaOperating Genesis Platinum-C LP Page Page Packaging requires at least two people Page Cooking box with finger grip toward you1 Num foil. It can cause grease fires by trappingGrease and not allowing grease to flow into Catch panInstalling Smoker Box Installing the warming rackInstall the bottom shelf Install Side Burner Assembly Install Left Work SurfaceCheck that all burner valves are off Improper Filling is Dangerous Important LP Cylinder Information Hang filled liquid propane cylinder on fuel gaugeConnection. Using a wrench could damage Regulator coupling and could cause a gas leakCheck for gas leaks Reinstall control panel after checking for gas Leaks Lighting To ExtinguishManual Lighting Still flowing to the burners. After turningOFF the cylinder and burner control Knobs, wait at least 5 minutes for the gasLighting the Side Burner Lighting only the side burnerCooking CleaningStorage and/or Nonuse MDANGER Refilling the Liquid Pro Pane Cylinder Regulator coupling and could cause a leak To Connect the hose to the cylinder Liquid Propane Cylinder Safe handling tips for Liquid Propane Gas CylInders Liquid Propane LP CylindersInspection and Cleaning of the Weber Annual MaintenanceOr explosion, which can cause serious General Maintenance Main Burner Cleaning ProcedureMain Burner Flame Pattern Weber Spider Stopper GuardsReplacing Main Burners Positioned properly over the valve orifices2Crossover Ignition System Operations Barbecue temperature only Flame is low when burner is onBurners burn with a yellow or Orange flame, in conjunction withSide Burner does not light Flame is low in High positionFlame is very yellow Conjunction with the smell of gasMWARNING All gas controls and supply valves Should be in the OFF positionTo Clean the Burner Head To Reassemble the Burner Head