Weber 1000 LX owner manual Check that all burner valves are off, Connect flexible hose to manifold

Page 16

Step 12

Check that all burner valves are off

You will need: one burner control knob.

Valves are shipped in the OFF position, but you should check to be sure. Put the knob on each valve. Check by pushing down and turning clockwise. If they do not turn they are off, proceed to the next step.Figure 13.

Figure 13

Step 13

Connect flexible hose to manifold

You will need: the 12 foot natural gas supply hose and a 3/4 inch wrench.

Thread fitting end of hose onto manifold. Figure 14 (a). Tighten with wrench.

(a)

Figure 14

16

Image 16

Contents Genesis 1000 LX MDANGER MWARNINGS LP GAS Units onlyWarranty Patents and Trademarks Contents For Installation in Canada Gas supply testingGeneral Instructions StorageCheck package contents AssemblyStep Two wheels Check contents of hardware packs Assemble wheels Assemble frameContinue frame assembly Complete frame assemblyInsert casters Add front panelAdd cooking box Install manifold bracket Install igniterInstall gas supply General Specifications for PipingGas line piping Test connectionsCheck that all burner valves are off Connect flexible hose to manifoldCheck for gas leaks Install Flavorizer Bars and Cooking Grates Install the bottom trayInstall Lid Add tool holders, control panel and burner control knobsInstall swing table Complete accessory installation Lighting To ExtinguishManual Lighting Cooking Periodic CleaningStorage and/or Nonuse Annual Maintenance Inspection and Cleaning of the Weber Spider Stopper GuardsGeneral Maintenance Weber Spider Stopper GuardsMain Burner Flame Pattern Replacing Main BurnersTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations Troubleshooting 14-15 52-55 10,14 19-20 Parts List Final Word Thanks