Weber 1000 LX owner manual Manual Lighting

Page 23

Manual Lighting

mDANGER

Failure to open lid while igniting the barbecue, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flame-up which can cause serious bodily injury or death.

1)Open the lid. Figure 2.

2)Make sure all burner control knobs are turned OFF. (Push each burner control knob down and turn clockwise.)

3)Turn gas supply valve on.

4)Strike a match and put the flame into the matchlight hole in the front of the cooking box.

Manual Lighting

1

2

7

4 3 6

5

Figure 2

mWARNING: Do not lean over open barbecue. Keep your face and body at least one foot away from the matchlight hole when lighting the barbecue.

5)Push Front burner control knob down and turn to START/ HI.

6)Check that the burner is lit by looking through the matchlight hole on the front of the cooking box.

mWARNING: If the burner does not light, turn the Front burner control knob to OFF and wait 5 minutes to let the gas clear before you try again or try to light with a match.

7)After the FRONT burner is lit you can turn on the other burners.

Note - Always light the FRONT burner first. The other burners ignite from the FRONT burner.

To Extinguish

Turn gas supply OFF at the source, then push down and turn each burner control knob clockwise to OFF.

23

Image 23
Contents Genesis 1000 LX LP GAS Units only MDANGER MWARNINGSWarranty Patents and Trademarks Contents Storage For Installation in CanadaGas supply testing General InstructionsStep AssemblyCheck package contents Two wheels Check contents of hardware packs Assemble frame Assemble wheelsComplete frame assembly Continue frame assemblyAdd front panel Insert castersAdd cooking box Install igniter Install manifold bracketTest connections Install gas supplyGeneral Specifications for Piping Gas line pipingConnect flexible hose to manifold Check that all burner valves are offCheck for gas leaks Install the bottom tray Install Flavorizer Bars and Cooking GratesAdd tool holders, control panel and burner control knobs Install LidInstall swing table Complete accessory installation To Extinguish LightingManual Lighting Storage and/or Nonuse Periodic CleaningCooking Inspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceReplacing Main Burners General MaintenanceWeber Spider Stopper Guards Main Burner Flame PatternTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations Troubleshooting 14-15 52-55 10,14 19-20 Parts List Final Word Thanks