Weber 1200 owner manual Assembly, Step, Check package contents

Page 7

Assembly

Step 1

Tools needed

Check package contents

 

Regular screwdriver

 

Phillips screwdriver

Cooking box

(assembly)

 

Hammer

 

7/16 inch open-end or an adjustable wrench

Lid (assembly)

® ®

Pliers

Block of wood

Supplies needed

Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank.")

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

LP tank

mWARNING: Use only the

LP tank supplied with your Weber Gas Barbecue

Filler adapter

Bottom tray

Two cooking grates

Control panel

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Platinum 1200 Series LP GAS Units only Warranty Patents and Trademarks Contents Operating area For Installation in CanadaGeneral Instructions StorageCheck package contents AssemblyStep Warming rack Fuel scale assembly Warm-Up Basket Two casters Check contents of hardware packs Assemble top frame Assemble wheelsComplete frame assembly Continue frame assemblyAdd front panel Insert castersAdd cooking box Install tank panel assembly Install manifold bracketInstall igniter Add fuel scale assemblySet LP fuel scale MCAUTION Do not remove adjustment wing nut from tank scaleFill LP tank Connect LP tank Check that all burner valves are offCheck for gas leaks MWARNING Do not ignite burners when leak checkingInstall the bottom tray Install Flavorizer Bars and Cooking GratesAdd tool holders, control panel and burner control knobs Install LidInstall swing table Complete accessory installation To Extinguish LightingManual Lighting Storage and/or Nonuse Periodic CleaningCooking Storage and/or NonuseRefilling the LP tank Connecting the filled LP tankRemoval of the LP tank Engaged Liquid Propane LP Tanks Safe handling tips for LP GasInspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceMWARNING Do not ignite burners while leak checking Main Burner Flame Pattern General MaintenanceMCAUTION Do not enlarge the burner ports when cleaning Weber Spider Stopper GuardsTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations Burner flame pattern is erratic. Flame is low When burner is on HIGH. Flames do not runBurner does not light, or flame is low in High position MCAUTION Do not line the bottom tray with aluminum foil14-15 19-20,15 10,15 Parts List Final Word Thanks
Related manuals
Manual 32 pages 26.71 Kb
Top Page Image Contents