Install TUCK-AWAY Support Bracket

10 ASSEMBLY

10 INSTALL TUCK-AWAY SUPPORT BRACKET

You will need: Tuck-Away support bracket, plastic tubing plug, 1/4-20 x 1 3/4 inch bolt, two nylon washers, 1/4-20 hex nut, 7/16 inch open-end or an adjustable wrench and pliers.

Insert tabs of support bracket through slot in Tuck-Away frame support (a).

Place a nylon washer on bolt, insert through Tuck-Away frame support and support bracket. Add another nylon washer, hex nut and tighten (b).

Insert plastic tubing plug (1) into top of Tuck-Away frame support. You may have to tap the plug lightly to fully seat it.

(a)

(b)

(1)