ASSEMBLY 5
2 ASSEMBLE FRAME
You will need: Top Frame Assembly (1), Bottom Frame Assembly (2), 7/16 inch
Remove hex nut and bottom washer (3) from the bolt that is preinstalled in the Top Frame Assembly. Do not remove top bolt and washer from Top Frame Assembly. Stand up the Bottom Frame Assembly with the caster toward you.
(1)
(3) 
(2)
Place the Top Frame Assembly (1) with the bolt and washer, on top of the Bottom Frame Assembly
(2). Make sure the caster of the Top Frame Assembly is toward your right.
Line up the bolt coming through the Top Frame Assembly with the Bottom Frame Assembly until the bolt can drop through the hole in the Bottom Frame Assembly. Add the washer, hex nut (3) and finger tighten.
(1)
(2)
(3)
Note: If the top frame assembly legs do not touch the ground, it has been assembled wrong.