REQUIRED ADJUSTMENTS AT TIME OF INSTALLATION
The installation of this appliance must conform with local codes, or in the absence of local codes, with
the latest edition of the National Fuel Gas Code ANSI Z223.1 USA or current CAN/CGA-B14£
INSTALLATION CODE.
I'--]This range was manufacturedfor use with Natural Gas. If LP gas is the fuel of choice, followthe conversionto LP procedurefound in the installationinstructions.
r--iTest all external connections for gas leaks. Never test for gas leaks with an open flame.
L'_ Test all electrical connections.
I--']Adjust all air shutters for proper flame.
r---iAdjust all valves for low flame settings.
--]Testthe ventilation system for proper installation.
( I If a problem exists with the downdraft system, check the ducting installation to make sure it conforms to the Jenn-AJrspecifications.Most downdraft system problems are attributedto poor ducting practices.
Contact your installer if the ventilation system will not remove smoke or cooking fumes from well trimmed cuts of meat.
I'--']If ventilation problems persist contact your authorized Jenn-Air Service Contractor.
JENN-AIR
3035 SHADEL.AND ° INDIANAPOLIS.IN 46226-0901