Legs with Axle
Holes
Air
Vent
Legs Without Axle Holes
Legs
Casters
Choose a good, cleared assembly area and get a friend to help you put your grill together. Lay cardboard down to protect grill finish and assembly area.
Step 1
Align the bolt holes in the legs with axle holes to bolt holes in the body. Insert two M6 x 50 bolts through each leg and secure
(hand tighten only at this point).
Step 2
With the help of a friend, turn the body on its other side. Align the bolt holes in the legs without axle holes to bolt holes in the body. Insert two M6 x 50 bolts through each leg and secure (hand tighten only at this point).
Step 3
Insert casters directly into holes in bottom of legs without axle holes.
Step 4
Insert axle through axle holes in legs. Place wheels on axles with recessed hubs facing out. Insert wheel cap through center of wheel to secure the wheel to the axle. Push until secure.
Push Cap
4