Cisco Systems AIRCAP1552EAK9RF AIR-CAP1552CU-x-K9, and AIR-CAP1552I-x-K9, AIR-CAP1552EU-x-K9

Chapter 3 Troubleshooting

Connecting to the Access Point Locally

Figure 3-2 Console Port Location on Access Point Models AIR-CAP1552C-x-K9,

AIR-CAP1552CU-x-K9, and AIR-CAP1552I-x-K9

1

255263

1

Console port

Figure 3-3 Console Port Location on Access Point Models AIR-CAP1552E-x-K9 and

AIR-CAP1552EU-x-K9

	1	2
			282138
1	Console port	2	Not used

Note The Cisco part number for the DB-9 to RJ-45 serial cable is AIR-CONCAB1200. To order a serial cable, browse to:

http://www.cisco.com/pcgi-bin/marketplace/welcome.pl

Step 2 Set up a terminal emulator program on your PC to communicate with the access point. Use the following settings for the terminal emulator connection: 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.

Step 3 When finished, remove your serial cable, and close the hinged cover (see the “Closing the Access Point Hinged Cover” section on page 2-13for instructions).

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

OL-24247-01 3-7