Cisco Systems AIRCAP1552EAK9RF manual 2-50, AC Power Cord, Cord Diameter, Comment, Description

Chapter 2 Installing the Access Point

Powering the Access Point

Table 2-4	AC Power Cord Information
AC Power Cord		Cord Diameter	Comment
AIR-CORD-R3P-40NA=		0.398 to 0.413 in.	The three prong plug is limited to 120 VAC.
		(10.1 mm to 10.5 mm)	Internal wiring is rated at 600 VAC insulation
			protection.
AIR-CORD-R3P-40UE=		0.398 to 0.413 in.(10.1 mm	Power cord rating is 100 to 480 VAC. Internal
		to 10.5 mm)	wiring is 16 AWG.
AIR-PWR-ST-LT-TAP=		Strain relief bushing not	Power cord rating is 100 to 480 VAC
		needed

When using a user-supplied AC power plug on the AIR-CORD-R3P-40UE= power cord, ensure that the plug is certified for outdoor use and that it has a minimum IP67 rating, such as Interpower 84131251 or Hubbell HBL316P6W (IEC/EN 60309) pin-and-sleeve type connectors. The European Union power cord plug pinouts are listed in Figure 2-37. For the location of the AC power connectors, see Figure 2-39and Figure 2-40.

Figure 2-37 European Union Plug Pinouts

1

32

255269

Pin	Description	Conductor Color	Pin	Description	Conductor Color
1	Ground	Green/Yellow	3	Neutral	Blue
2	Live	Brown

Caution All AC power plugs and AC receptacles must be protected from water and other outdoor elements. Use a UL listed waterproofing enclosure suitable for covering the AC receptacle and AC power plug that supplies power to the unit as described in Article 406 of the NEC. If the power cord goes through a metal cover, install a bushing to prevent fraying of the cord.

When using a strain relief bushing, you should follow these recommendations:

•Use properly sized parts (see Table 2-4for the power cord diameter)

•Use bushings that are safety certified

•Use parts that are suitable for outdoor installation

Caution If your power cord does not use an AC power plug, you must ensure that the power source is OFF before connecting or disconnecting the power cord wires from the power source.

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-50	OL-24247-01