Cisco Systems AIRCAP1552EUAK9 manual Installing the Mounting Bracket on a Pole All Models, 2-18

Chapter 2 Installing the Access Point

Mounting the Access Point

Installing the Mounting Bracket on a Pole (All Models)

When installing an access point on a vertical pole, mast, or a streetlight pole, you should use the optional Cisco pole mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.

Assembling the Pole Clamp Bracket and the Mounting Bracket

When installing an access point on a pole, mast, or a streetlight, you should use the optional Cisco pole mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.

The pole mount kit contains several parts that you must assemble prior to mounting on a pole. First you need to assemble two strap brackets on the pole clamp bracket that are positioned for the pole diameter you are using to mount the access point. Figure 2-8illustrates the pole diameter indicators and bolt holes on the pole clamp bracket.

Figure 2-8 Pole Clamp Bracket Adjustment Hole Locations

1	Pole size indicators		2	Bolt holes for pole diameters (11 to 16
	• 2 to 6 in.			inches indicated)
	•	6 to 11 in.
	•	11 to 16 in.

To assemble the pole clamp bracket, follow these steps:

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-18	OL-24247-01