Manuals / Cisco Systems / Computer Equipment / Network Router

Cisco Systems AIRCAP1552EUAK9 Access Point Specifications, A P P E N D I X D, see Table D-2 and

Models: AIRPWRINJ15002 AIRCAP1552EUAK9 AIRCAP1552EAK9RF

1 164

Download 164 pages 31.9 Kb

Page 145

A P P E N D I X D

A P P E N D I X D

Access Point Specifications

Table D-1lists the technical specifications for the Cisco Aironet 1552 Outdoor Mesh Access Points. For detailed specifications, refer to the Cisco Aironet 1550 Series Outdoor Access Point data sheet at:

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html

Table D-1 Access Point Specifications

	Category	Specifications

	Size	•	1552C/1552I: 12.3 in. x 8.6 in. x 5.6 in. (31.2 cm x 22.9 cm x 14.2 cm)
		• 1552E/EU/CU: 12.3 in. x 8.6 in. x 6.1 in. (31.2 cm x 22.9 cm x 16.3 cm)

	Weight	•	1552E/EU: 17.3 lbs (7.8 kg)
		• 1552C/CU: 14 lbs (6.4 kg)
		• 1552I: 14 lbs (6.4 kg)
		• Battery backup: 1.5 lbs (0.7kg)
		• Pole mounting bracket: 6.1 lbs (2.8 kg)
		• Cable strand mounting bracket: 1.3 lbs (0.6 kg)

	Connector	•	1552EU/CU: Six female Type N antenna connectors (3 for 2.4-GHz radio, 3 for 5 GHz radio)
		• 1552E: Three female Type N antenna connectors (dual band ports for 2.4 and 5 GHz radios)
		• 1552E/EU/I: AC power connector-3-pin Remke Mini-Link 50909 connector
		• 1552E/EU/I: Internal PoE-in connector (uplink port)-RJ-45 connector
		• 1552E/EU: Internal PoE-out connector (downlink port)-RJ-45 connector
		• 1552E/EU: Optional internal SFP fiber module- LC fiber connector
		• 1552C/CU: Cable connector-Stinger connector (customer supplied)

	Power sources	•	90 to 480 VAC, 50 to 60 Hz (models 1552E/EU)
	(see Table D-2and	•	110 to 277 VAC, 50 to 60 Hz (model 1552I)
	Table D-3for power	•	110 to 277 VAC, 50 to 60 Hz (model 1552I)
	Table D-3for power	•	40 to 90 VAC, 50 to 60 Hz, quasi-square wave, Power over Cable (POC) (models 1552C/CU)
	distribution budget)	•
		• Power over Ethernet (PoE) with power injector: 56 VDC percent (models 1552E/EU)
		•	12 VDC

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

	OL-24247-01	D-1

Image 145

Cisco Systems AIRCAP1552EUAK9 manual Access Point Specifications, A P P E N D I X D, see Table D-2 and, Table D-3 for power

Contents

Cisco Systems, Inc 170 West Tasman Drive San Jose, CA April Revised February 20800 553-NETS Fax 408 Americas HeadquartersTurn the television or radio antenna until the interference stops C O N T E N T S ConnectorsPreface ObjectivesWarnings Mounting Bracket Assembly on a PoleAssembling the Pole Clamp Bracket and the Mounting Bracket GPS OptionConnecting a Fiber-Optic Cable to the Access Point Antenna N-Type Connector LocationsAdding the Access Point MAC Addresses to the Controller Filter List TroubleshootingConnecting the Backup Battery Cable and Closing the Radio Cover Before Beginning the Installation or Replacement93/42/EEC Access Point Pinouts E-1 Operation of Cisco Aironet Access Points in Brazil B-11EU Declaration of Conformity B-11 English Translation B-12Contents viiiOL-24247-01 Objectives PrefaceAudience Troubleshooting Installing the Access PointInstalling or Replacing the Backup Batteryitalic screen font Varoitus TÄRKEITÄ TURVALLISUUSOHJEITA Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA xiiiEste símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo OL-24247-01 Running H/F Running H/FFinding the Product Serial Number Related Documentsxvii Obtaining Documentation, Support, and Security GuidelinesRunning H/F Running H/F xviiiOL-24247-01 Hardware Models, page Hardware Features, page About the 1552 Access PointOverview C H A P T E RHardware Models less/ps5679/ps5861/productdatasheet0900aecd80537b6a.html less/ps5679/ps5861/productdatasheet0900aecdless/ps5679/ps5861/productdatasheet0900aecd less/ps5679/ps5861/productdatasheet0900aecdless/ps5679/ps5861/productdatasheet0900aecd 80537b6a.htmlPower Options Battery Backup OptionRegulatory Domains AntennasConnectors Hardware FeaturesConnectors, page Antenna Port Locations, page Multiple Radio Operation, page Antenna Configurations, pageConnectors 1552E/1552EU ConnectorsNot used Console portAccess Point Model AIR-CAP1552EU-x-K9 Top Connectors Chapter 1 Overview Hardware Features1552C/1552CU Connectors 1552I ConnectorsAccess Point Model AIR-CAP1552I-x-K9 Bottom Connectors Figure 1-7 Access Point Model AIR-CAP1552CU-x-K9 Top Connectors 1-10 Connectors for All ModelsFigure 1-9 Access Point DC Power Connector and Ground Lug All Models AIR-CAP1552CU-x-K91-11 Antenna Port Locations1-12 Multiple Radio OperationLow Profile Dual-Band 2.4/5-GHz Omni Antenna Array Antenna Configurations1-13 1-14 Cisco Aironet Dual-Band Omnidirectional Antenna AIR-ANT2547V-N1-15 1-16 AIR-CAP1552EU-x-K9 and AIR-CAP1552CU-x-K9 1-17Cisco Aironet 2.4-GHz 5-dBi Omnidirectional Antenna AIR-ANT2450V-N Cisco Aironet 2.4-GHz 2-dBi Omnidirectional Antenna AIR-ANT2420V-N1-18 1-19 Cisco Aironet 2.4-GHz 8-dBi Omnidirectional Antenna AIR-ANT2480V-NCisco Aironet 5-GHz 8-dBi Omnidirectional Antenna AIR-ANT5180V-N Cisco Aironet 5-GHz 4-dBi Omnidirectional Antenna AIR-ANT5140V-N1-20 1-21 Multiple Power SourcesEthernet PoE Ports Cable Modem POC1-22 1-23 Fiber OptionWarning Class 1 laser product. Statement Metal Enclosure GPS OptionOptional Hardware 1-24Network Deployment Examples Wireless BackhaulPoint-to-Point Bridging 1-251-26 Point-to-Multipoint BridgingFigure 1-23 Access Point Point-to-Point Bridging Example Figure 1-24 Access Point to Multipoint Bridging Example1-27 Point-to-Multipoint Mesh NetworkFigure 1-25 Typical Mesh Configuration Using Access Points 1-28 Layer 3 Network OperationUnpacking the Access Point, page Tools and Hardware, page Installing the Access PointWarnings, page Safety Information, page Avoiding Damage to Radios in a Testing Environment, pagePackage Contents Unpacking the Access PointPole Installation Hardware and Tools, page Cable Strand Installation Hardware and Tools, pageOptional Tools and Hardware That You Supply Pole Installation Hardware and ToolsWarnings Cable Strand Installation Hardware and ToolsSAVE THESE INSTRUCTIONS FCC Safety Compliance Statement Safety InformationSafety Precautions Warning The AC power supply has double pole/neutral fusing. Statement Avoiding Damage to Radios in a Testing Environment Site Surveys Installation GuidelinesBecoming Familiar with Access Point Installation Components Before Beginning the InstallationBuilding roof-overhang 2-10Figure 2-2 Pole Mount Installation 2-11Cable Strand Mounting Kit brackets 2-12Closing the Access Point Hinged Cover Opening the Access Point Hinged Cover2-13 Installation Options Mounting the Access Point2-14 Installing the Mounting Bracket on a Wall All Models Access Point Mounting OrientationAccess Point Mounting Orientation, page Installing the Mounting Bracket on a Wall All Models, pageMaterials Required 2-16In Kit Access point quick mount notches 2-17Assembling the Pole Clamp Bracket and the Mounting Bracket Installing the Mounting Bracket on a Pole All Models2-18 M8 x1.25x16 bolts with lock washers 2-192-20 Mounting Bracket Assembly on a PoleMaterial Needed to Mount Access Point on a Pole 2-21 Metal strap open space 2-222-23 Installing 1552E, 1552EU, or 1552I in the Mounting BracketFigure 2-14 Location of Access Point Top Support Bolt Hole on 2-24Chapter 2 Installing the Access Point Mounting the Access Point 345827Figure 2-15 Access Point 1552E/1552EU Hanging in Mounting Bracket 2-25Cable Strand Mounting the 1552C or 1552CU Access Point Installing 1552C or 1552CU in the Mounting Bracket2-26 Cable Strand Mounting the 1552C or 1552CU Access Point, pageTo mount the access point, follow these steps 2-27M8 x16 bolts with lock washers 2-28Figure 2-19 Attach the Cable Strand to the Cable Mount Brackets 2-292-30 Mounting the 1552C or 1552CU Access Point on a Pole/WallUnused 2-312-32 Figure 2-23 Mounting Bracket Position for Vault Mounting 2-33Figure 2-24 Attaching Grounding Lug to Grounding Point 2-34Figure 2-25 1552C Access Point Facing Up in Vault Location 2-352-36 Installing AntennasFrequency Product ID2-37 Antenna N-Type Connector LocationsFigure 2-26 Antenna Port Locations - Model AIR-CAP1552E-x-K9 2-38 Antenna Mounting OptionsChapter 2 Installing the Access Point Installing Antennas 2-39Figure 2-28 AIR-CAP1552C-x-K9 and AIR-CAP1552I-x-K9 Figure 2-29 AIR-CAP1552E-x-K9AIR-ANT5180V-N AIR-ANT2450V-N or AIR-ANT2480V-N 2-402-41 Grounding the Access PointSafety Precautions 2-42 Connecting a Fiber-Optic Cable to the Access PointFigure 2-32 Fiber-Optic Cable Components 2-43Thread end 2-44Connecting a 1500 Series Power Injector Powering the Access PointConnecting a 1500 Series Power Injector, page 120 VAC-Connecting an AC Power Cable to the Access Point, pageStep 7 Continue with What to Do Next, page Connecting an Ethernet Cable to the Access Point2-46 AIR-CAP1552EU-x-K9 2-47Figure 2-35 liquid-tight Adapter 2-482-49 AC Power Cord 2-50AC Power Cord Information Cord DiameterStatement Connecting Streetlight AC Power2-51 Figure 2-38 Using the Streetlight Power Tap Adapter 2-52Figure 2-39 AC Power Connector - Shown on Access Point Model AIR-CAP1552E-x-K9 2-532-54 Connecting an AC Power Cable to the Access PointStatement 2-55 Connecting a DC Power Cable to the Access PointFigure 2-41 Location of the DC Power Liquid-Tight Adapter 2-56Figure 2-42 Liquid-Tight Adapter Securing screws 2-572-58 Connecting a Cable POC Power to the Access PointFigure 2-45 RF Splitter Components 2-59Adding the Access Point MAC Addresses to the Controller Filter List Configuring the Access Point2-60 Configuring a Bridge Group Name Configuring a RAPStep 2 Choose SECURITY MAC Filtering New 2-61The BGN is a string of ten characters maximum. A factory-set bridge group name NULL VALUE is assigned during manufacturing. It is not visible to you, but allows new access point radios to join a network of new access points. The BGN can be reconfigured from the Controller CLI and GUI. After configuring the BGN, the access point reboots 2-622-63 What to Do NextStep 5 Click Apply Chapter 2 Installing the Access Point What to Do Next 2-64OL-24247-01 Guidelines for Using the Access Points, page TroubleshootingController MAC Filter List, page Using DHCP Option 43, page Monitoring the Access Point LEDs, pageConvergence Delays Guidelines for Using the Access PointsImportant Notes Bridge Loop Controller MAC Filter ListController DHCP Server MAP Data TrafficMonitoring the Access Point LEDs Using DHCP OptionColor1 Verifying Controller AssociationMeaning Changing the Bridge Group Name Connecting to the Access Point LocallyAIR-CAP1552EU-x-K9 AIR-CAP1552CU-x-K9, and AIR-CAP1552I-x-K9Figure 3-4 Power Injector Connectors and LEDs Access Point Power InjectorMonitoring the Power Injector LEDs Using the Reset ButtonDisabling Backup Battery Power Reboot the Access Point3-10 Note The battery backup unit is reactivated when the access point is rebooted power cycled again 3-11Chapter 3 Troubleshooting Using the Reset Button 3-12OL-24247-01 Before Beginning the Installation or Replacement, page Installing or Replacing the Backup BatteryOpening the Access Point Radio Cover, page Removing a Backup Battery, page Installing a New Backup Battery, pageBefore Beginning the Installation or Replacement Opening the Access Point Radio Cover Removing a Backup Battery Figure 4-3 Backup Battery Screws Installing a New Backup BatteryWhat to Do Next Connecting the Backup Battery Cable and Closing the Radio CoverFigure 4-4 Radio Cover Screw Tightening Sequence Step 5 Click Install and Upgrade Translated Safety WarningsStep 6 Click Install and Upgrade Guides A P P E N D I X AOL-24247-01 Appendix A Translated Safety WarningsA P P E N D I X B Declarations of Conformity and Regulatory InformationIndustry Canada, page B-3 Declaration of Conformity for RF Exposure, page B-7FCC Certification number ModelsManufacturer Tested To Comply With FCC Standards FOR HOME OR OFFICE USEDeclaration of Conformity for RF Exposure Industry CanadaCanadian Compliance Statement IC Certification NumberEuropean Community, Switzerland, Norway, Iceland, and Liechtenstein Access Point ModelsOL-24247-01 Appendix B Declarations of Conformity and Regulatory InformationPage Canada United StatesEuropean Union AustraliaJapanese Translation Lightweight Access Point ModelEnglish Translation Guidelines for Operating Cisco Aironet Access Points in JapanVCCI Statement for Japan Administrative Rules for Cisco Aironet Access Points in TaiwanChinese Translation B-10 Chinese Translation English TranslationEnglish Translation Statement 371-Power Cable and AC Adapter Operation of Cisco Aironet Access Points in BrazilAccess Point Models EU Declaration of ConformityPortuguese Translation Regulatory InformationB-12 English TranslationStep 3 Click Wireless Channels and Power LevelsA P P E N D I X C Step 5 Click Install and UpgradeOL-24247-01 Appendix C Channels and Power LevelsTable D-3 for power Access Point SpecificationsA P P E N D I X D see Table D-2 andTable D-1 Access Point Specifications continuedCategory Category SpecificationsOptional components Total Power ConsumptionTotal power budget when using POC power source Total power budget when using DC power sourceTotal power budget when using AC power source Total power budget when using DC power sourceGI 2 = 800ns MCS IndexGI = 400ns 40-MHz Rate MbpsOL-24247-01 Appendix D Access Point SpecificationsA P P E N D I X E Access Point PinoutsPower Injector Output Connector To AP Pinouts Power Injector Input Connector To Switch PinoutsTable E-3 Table E-4A P P E N D I X F Configuring DHCP OptionOverview, page F-2 Access Point OverviewVendor Class Identifier VCI Configuring Option 43 for 1000, 1500, and 1550 Series Access Points Type + Length + Value GL-1 G L O S S A R YGL-2 GL-3 A device that connects two otherwise incompatible networks togetherGL-4 GL-5 GL-6