Cisco Systems AIRCAP1552EUAK9, AIRCAP1552EAK9RF Verifying Controller Association, Color1, Meaning

Chapter 3 Troubleshooting

Verifying Controller Association

Table 3-1	Access Point LED Signals
LED		Color1, 2	Meaning
Status		Black	No power applied or LED off.
		Steady green	Access point is operational.
		Blinking green	Download or upgrade of Cisco IOS image file in progress.
		Steady amber	Mesh neighbor access point discovery in progress.
		Blinking amber	Mesh authentication in progress.
		Blinking red / green /amber	CAPWAP discovery in progress.
		Steady red	Firmware failure. Contact your support organization for assistance.
Uplink		Black	All network ports down or LED off.
		Steady green	Uplink port is operational (cable, fiber optic, or Ethernet).
RF-1		Black	Radio turned off or LED off.
		Steady green	Radio is operational; network is good.
		Steady red	Firmware failure. Contact your support organization for assistance.
RF-2		Black	Radio is turned off or LED off.
		Steady green	Radio is operational; network is good.
		Steady red	Firmware failure. Contact your support organization for assistance.

1.If all LEDs off, the access point has no power.

2.When the access point power supply is initially turned on, all LEDs are amber.

Verifying Controller Association

To verify that your access point is associated to the controller, follow these steps:

Step 1 Log into your controller web interface using a web browser.

You can also use the controller CLI show ap summary command from the controller console port. Step 2 Click Wireless, and verify that your access point MAC address is listed under Ethernet MAC. Step 3 Log out of the controller, and close your web browser.

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

OL-24247-01 3-5