
Step 7
Screw the bottom door pivot into the bottom right side door hole. Then place bottom door pivot into the hole on right side cart panel. Align the top of the door with the hole in the upper door hinge and insert top door pivot, tighten securely. Repeat for other door.
Note: When performing Step 8, lift grill body from front and rear panels to avoid injury to hands and fingers.
Step 8
With the help of a friend, place grill body assembly on assembled cart frame. Grill body will rest on angled top of vertical supports. Align bolt holes located on the outside of the grill body assembly. Secure using four M6 X 15mm bolts. At this point, fully tighten four bolts holding back panel frmo Step 3 and the four bolts holding door bracket from Step 5.
Top Door Pivot
Bottom Door Pivot 
25