Connecting Hose and Regulator

WARNING

•Never use your grill without leak testing all gas connections and hoses. See the section on "Leak Testing" in this manual for proper procedures.

WARNING

The pressure regulator and hose assembly supplied with your gas grill must be used.

•DO NOT attempt to connect it to any other fuel supply source such as a natural gas line.

•DO NOT use any other pressure regulator/hose assembly other than the one supplied with your grill. Replacement pressure regulator/hose assembly must be part No 155-2400-0, which can be obtained by contacting customer service at 800-527-0717.

•DO NOT attempt to adjust or repair the regulator. The regulator is designed to operate at a maximum output pressure of 11 inches of water column (2.74 kPa).

During assembly and/or replacement of the gas cylinder, keep the gas supply hose free of kinks and/or damage.

Visually inspect the hose assembly prior to each use for evidence of damage, excess wear, or deterioration. If found, replace the assembly before using your grill. Only the manufacturer's supplied replacement should be used.

WARNING

CONNECTING HOSE AND REGULATOR TO AN LP GAS CYLINDER

•Ensure the tank valve is CLOSED prior to connecting the LP gas cylinder to your grill. Turn the valve knob clockwise to properly close the valve. Read and follow all instructions and warnings on the supply hose safety tags. Read and follow all warnings in this manual concerning the safe use of LP gas cylinders and the hose and regulator before connecting cylinder to grill. Read and follow all warnings on the LP cylinder.

1.Check that the cylinder valve is closed by turning the knob clockwise.

2.Check that the grill’s burner control knobs are in the "OFF" positions.

3.Remove the protective plastic cap from the cylinder valve and the connection device.

4.Hold regulator and insert the nipple of connection device into the LP cylinder valve outlet. Ensure that the device is centered properly.

5.Turn the large coupling nut clockwise by hand and tighten to a full stop. Take care not to cross thread the coupling nut onto the cylinder valve. Do not over-tighten the knob onto the valve. Do not use tools to tighten connection.

Note: If you are unable to make the connection, repeat Steps 4 and 5.

6.Check that the hose does not contain kinks, does not contact sharp edges, and does not contact surfaces that may become hot during use.

7.Leak check all fittings before lighting your grill. See section on "Leak Testing" in this manual.

Madison specifications

Brinkmann Madison is a premium outdoor grill that has gained popularity among barbecue enthusiasts and culinary experts alike. Known for its exceptional build quality and user-friendly features, the Madison model captures the essence of outdoor cooking with a combination of advanced technologies and classic design elements.

One of the most notable features of the Brinkmann Madison grill is its robust construction. Made from high-quality stainless steel, the grill offers durability and resistance to rust and corrosion. This ensures that it can withstand the rigors of outdoor use and the elements, while maintaining a sleek and polished appearance. The grill’s heavy-duty lid is another key characteristic, designed to retain heat and smoke, which enhances the flavors of the food being cooked.

Equipped with multiple burners, the Madison model boasts even heat distribution, allowing for precise temperature control, essential for various cooking techniques. Whether you are searing steaks, roasting vegetables, or smoking meats, this grill accommodates diverse culinary styles. The burners are designed for quick ignition, typically featuring an electronic ignition system for easy start-up. This convenience makes the Brinkmann Madison accessible to both beginners and seasoned grill masters.

The cooking surface of the Madison is expansive, offering ample space for multiple dishes. It's constructed with heavy-duty cast iron grates that provide excellent heat retention and create perfect grill marks on your food. Additionally, these grates are designed for easy cleaning, making maintenance a simple task after a long day of grilling.

Another essential feature is the built-in temperature gauge located on the lid. This allows users to monitor the internal heat without lifting the lid, preventing heat loss and ensuring optimal cooking conditions. The Brinkmann Madison also incorporates side shelves that offer extra prep space, making it easier to marinate, season, or prepare ingredients prior to grilling.

For those who enjoy outdoor entertaining, the Madison's sleek build and versatile cooking capabilities make it a centerpiece of any backyard gathering. With its emphasis on durability, functionality, and ease of use, the Brinkmann Madison promises to elevate every outdoor cooking experience, enabling users to create memorable meals and lasting memories. Overall, it stands out as a robust, reliable, and stylish choice for outdoor grilling enthusiasts.