Brinkmann 2600 Series owner manual Transporting and Storage, Before Storing Your Grill

Page 14

WARNING

TRANSPORTING AND STORAGE:

Never move a grill when it is hot or when objects are on the cooking surfaces.

Make sure that cylinder valve is shut off. After moving the grill check that all gas connections are free of leaks. Refer to instructions for leak test on page 7 of this manual.

DO NOT store a spare LP gas cylinder (filled or empty) under or near the grill.

Never store flammable liquids or spray canisters under or near the grill.

DO NOT extinguish grease fires using water.

If the outdoor cooking gas appliance is not in use, the gas must be turned off at the supply cylinder.

Storage of an outdoor cooking gas appliance indoors is permissible only if the cylinder is disconnected and removed from the outdoor cooking gas appliance.

Cylinders must be stored outdoors out of reach of children and must not be stored in a building, garage or any other enclosed area.

Follow the instructions listed below.

BEFORE STORING YOUR GRILL:

Ensure that the fuel supply tank valve is fully closed.

Clean all surfaces.

Lightly coat the burners with cooking oil to prevent excess rusting.

If storing the grill indoors, disconnect the LP tank and leave the LP tank OUTDOORS.

Place a protective cap cover on the LP tank and store the tank outdoors in a well ventilated area out of direct sunlight.

If storing the grill outdoors, cover the grill with a grill cover for protection from the weather. A grill cover can be purchased by contacting: The Brinkmann Corporation at 1-800-527-0717.

13

Image 14
Contents Gas Stainless Steel Outdoor Grill Important Safety For Your SafetyPage Installation Information Cylinder SpecificationsPage Hose and Regulator Installing the LP GAS Cylinder Onto the GrillFilling the LP GAS Cylinder Connecting Hose and Regulator to AN LP GAS Cylinder Checking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Main Burners Lighting InstructionsLighting the Main Burners Turning OFF the Grill Lighting the Side BurnerMatch Lighting the Side Burner Preheating the Grill Operating the GrillBreaking in Your Grill Controlling FLARE-UPSRotisserie Cooking Side BurnerTransporting and Storage Before Storing Your GrillHardware Cleaning and MaintenanceBurner ASSEMBLY/MAINTENANCE CastingsTrouble Shooting Problem Possible Causes Burner will not lightHelpful Hints CleanlinessGrilling to Proper Temperature Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using six M6 X 60mm bolts Tank Tray Assembly Step Spring Pin Grease Tray Bracket Igniter Button Cap Step Side Table Screw Holes Tool Drawer Step Pro Series 2600 Assembled Accessories Gallon PAN & Basket SET Warranty