Brinkmann 2600 Series owner manual Side Table Screw Holes Tool Drawer

Page 27

Side Table

Screw Holes

Tool Drawer

Step 13

Attach side table/ice bucket assembly to grill body assembly by inserting four M6 X 20mm bolts through the holes in the side table/ice bucket assembly and into holes of grill body assembly. Tighten all four bolts.

Step 14

Insert tool drawer into front opening under control panel by dropping roller wheels into side channels.

Warning: DO NOT store flammable products: paper towels, rags, pot holders, etc. in tool drawer.

Roller Wheels

Side Channel

Image 27

Contents

Gas Stainless Steel Outdoor Grill For Your Safety Important SafetyPage Cylinder Specifications Installation InformationPage Installing the LP GAS Cylinder Onto the Grill Filling the LP GAS CylinderHose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder Leak Testing When to Perform a Leak TestChecking for Leaks PRE-START Check List Lighting Instructions Lighting the Main BurnersMatch Lighting the Main Burners Lighting the Side Burner Match Lighting the Side BurnerTurning OFF the Grill Controlling FLARE-UPS Operating the GrillBreaking in Your Grill Preheating the GrillSide Burner Rotisserie CookingBefore Storing Your Grill Transporting and StorageCastings Cleaning and MaintenanceBurner ASSEMBLY/MAINTENANCE HardwareProblem Possible Causes Burner will not light Trouble ShootingCleanliness Grilling to Proper TemperatureHelpful Hints Assembly Instructions For Missing PARTS, Please Call Customer Service AT Parts Card Contents Step Attach back cart panel by using six M6 X 60mm bolts Tank Tray Assembly Step Spring Pin Grease Tray Bracket Igniter Button Cap Step Side Table Screw Holes Tool Drawer Step Pro Series 2600 Assembled Accessories Gallon PAN & Basket SET Warranty

Related manuals

Manual 32 pages 37.87 Kb