3. Using the Unit
3. Press the START button.
EN |
The measurement is complete in 1 second with a long beep.
The display will light up and the “
” symbol will flash for 5 seconds.
Note: You can take another measurement after the display light turns off with 2 beeps. Make sure “
” symbol remains lit.
4. Remove the unit from the ear and check the measurement result.
Note:
•If your measurement result is over 37.5°C (99.5°F), the buzzer will beeps three times after a long beep.
•After each Ear Measurement, the unit needs 5 seconds to be ready for next measurement. During this 5 seconds waiting time, the ear icon will be flashing and Backlight will light.
5.Press and hold the ON/MEM button until “OFF” appears on the display to turn off the unit.
The unit automatically stores the measurement in it’s memory. |
|
It will automatically turn off after 1 minute. | 9 |
|