Omron 9063366-4A instruction manual Setting the Buzzer, Release the ON/MEM button, Preparation

Page 6

2. Preparation

2.3Setting the Buzzer

The buzzer is only available in the Ear Measurement Mode.

The buzzer is set on as default.

1. Press the ON/MEM button to turn on the unit.

2. Press and hold the ON/MEM button for 3 seconds.

The “” symbol flashes on the display.

3. Release the ON/MEM button.

The “” symbol remains lit and the buzzer is set to off.

Notes:

•If the ON/MEM button is pressed down for more than 5 seconds after the “” flashing, the unit turns off without setting the buzzer.

•To turn the buzzer on, start from step1.

EN

5

Image 6

Contents Model Gentle Temp Important Safety Information Important Safety Information General PrecautionsOverview Main unit DisplaySwitching between C and F PreparationRemoving the Insulating Tape Setting the Buzzer Release the ON/MEM buttonPreparation Attaching a Probe Cover Using the Unit Taking a ReadingPress the ON/MEM button Measuring the temperature of an infant Using the UnitPress the Start button Page Using the Memory Function Troubleshooting and Maintenance Icons and Error MessagesTroubleshooting and Maintenance Maintenance Replacing the Battery Replace the battery coverTechnical Data Measurement AccuracyTechnical Data OptionsDistance is shorter Temperature measurements taken within the ear Normal and raised temperatureSome Useful Information Age Normal ear temperature in C and F Some Useful InformationEar temperature compared to other types of body Temperature Questions and answersTemperature shown is rather low Omron Healthcare Europe B.V