Omron Gentle Temp 520 Preparation, Removing the Insulating Tape, Switching between C and F

Page 5

2. Preparation

2.1Removing the Insulating Tape

Pull the insulating tape out from the battery compartment by catching hold of the outer part for the first time.

2.2Switching between °C and °F

This unit is set in °C as default.

1. While the power is off, press and hold the START button.

2. While holding it down, press and hold the ON/MEM button until °F appears on the display with 2 beeps.

4

Notes:

• To select the °C mode, start from step1.

• When the unit is switched between °C and °F, all the readings stored in the memory are deleted.

Image 5

Contents Model Gentle Temp Important Safety Information General Precautions Important Safety InformationMain unit Display OverviewRemoving the Insulating Tape Switching between C and FPreparation Preparation Setting the BuzzerAttaching a Probe Cover Taking a Reading Using the UnitUsing the Unit Measuring the temperature of an infantPress the Start button Using the Memory Function Icons and Error Messages Troubleshooting and MaintenanceTroubleshooting and Maintenance MaintenanceReplacing the Battery Measurement Accuracy Technical DataOptions Technical DataDistance is shorter Some Useful Information Temperature measurements taken within the earNormal and raised temperature Some Useful Information Age Normal ear temperature in C and FQuestions and answers Ear temperature compared to other types of body TemperatureTemperature shown is rather low Omron Healthcare Europe B.V