Omron Gentle Temp 520 instruction manual Attaching a Probe Cover

Page 7

2. Preparation

2.4Attaching a Probe Cover

Always use a new and undamaged OMRON MC-EP2 probe cover.

1. Gently twist off the probe cap.

Note: Do not forcibly remove the probe cap.

2. Place a new probe cover on the connection ring.

Note: The adhesive side of probe cover should be upward.

Place Adhesive Side Upward

Probe cover

Connection ring

3. Insert the probe into the probe cover on the connection ring until it clicks.

Note: When the probe cover is not attached correctly, the probe cover symbol “” will flash on the display and a measurement can’t be taken.

6

Image 7

Contents Model Gentle Temp Important Safety Information General Precautions Important Safety InformationMain unit Display OverviewPreparation Switching between C and FRemoving the Insulating Tape Preparation Setting the BuzzerAttaching a Probe Cover Taking a Reading Using the UnitUsing the Unit Measuring the temperature of an infantPress the Start button Using the Memory Function Icons and Error Messages Troubleshooting and MaintenanceTroubleshooting and Maintenance MaintenanceReplacing the Battery Measurement Accuracy Technical DataOptions Technical DataDistance is shorter Normal and raised temperature Temperature measurements taken within the earSome Useful Information Some Useful Information Age Normal ear temperature in C and FQuestions and answers Ear temperature compared to other types of body TemperatureTemperature shown is rather low Omron Healthcare Europe B.V